MRC Forum- brought to you by www.morini-riders-club.com

I'm guessing this is it? https://www.geminikarts.co.uk/product/g ... -cylinder/

Ariete makes two different kits for 13 mm master cylinders.
https://www.ebay.com/itm/171737291245
https://www.ebay.com/itm/174003968255

So, you like Guzzi`s ? I`ve had v50 Monza, 850 Le mans, Daytona RS 1000, V10 Centauro, 650 NTX, 1000 Quota. If I ever wanted a cruiser, I wouldnt mind the old automatic one. You could say that. :D I've also had a V50 III, 1000 Le Mans, Centauro, 1000SP, G5, 850-Ts, V700 and more I'm likely forgetti...

My '77 3 1/2 Strada currently shares shop space with my '69 Moto Guzzi 750 Ambassador, '76 Moto Guzzi Convert, '90 Moto Guzzi Cal III FF, parts of my '81 Ducati 500SL Pantah and the newest arrival, an '07 Suzuki DR200SE. Stored elsewhere are a '71 Moto Guzzi 750 Ambassador, '73 and '75 Moto Guzzi 85...

Fastmongrel wrote: ↑20 Dec 2023 16:38 Eurocarb has two options for float needles hard spring or soft which should I order the original is solid with no spring.

I use the solid with no spring like the original.

Rick's Motorsport Electrics in the US can't do it?

Good point Dom, I found similar with the LED rear I tried. It was a while ago though and I think there is something about the colour of the LEDs too. Something like it's better to use white LEDs with a traditional red lens? Or vice versa..I haven't worried about the rear lamp since then, it's only ...

I'm running a similar LED bulb in several of my bikes, mostly to keep the load down on old charging systems, but also to make myself more visible during the day. I rarely ride at night though, so no feedback on whether they "blind" oncoming traffic.

I used a Moto Guzzi cable on my 350 K2 when it's original failed.
https://www.gutsibits.co.uk/pr/TheShop/ ... rch=SEARCH

I used "door edge trim" from the local auto parts. Virtually identical to the original edging.

What year is the 3 1/2 Sport in question?

Trade number 74. I buy them here in the US: https://www.mcmaster.com/1505K359/

I used Moto Guzzi V50 footpeg rubbers on my '85 350 K2.
https://www.gutsibits.co.uk/pr/TheShop/ ... rch=SEARCH

I installed a new-old-stock 11 mm Grimeca master cylinder meant for an MZ 250 on my '77 Strada. With the stainless braided lines, it gives great feel and power.

I've never received a Venhill cable that was correct! The throttle cables I bought two years ago for my Strada had an inner wire 10 mm too short. And yes, Verlicchi throttle, adjusters all the way in. I had Barnett Cable in California duplicate my original throttle cables and they fit perfectly. Pre...