MRC Forum- brought to you by www.morini-riders-club.com

Thanks for the information, would be grateful if you would keep in touch with the progress as I am a bit stuck at the moment
My email address is kennethnormanton@gmail.com
Regards
KEN

Hi There
Noisy top end on my Kanguro X1 have found the rocker spindles and bushes are worn. can get bushes fron NLM but they dont have the spindles.
Can anyone supply me with new ones or know of a supplier here in UK or in Europe
Cheers
Ken

Still looking for an X1 chainguard
Must be one out there somewhere hiding in the back of a garage
Ken

Any pics and roughly how much
Ken

So who is the industrial supplier and would they sell me a couple of belts
Ken

Going to replace the cam belt on my Kanguro.
I see on the forum there is a few different makes. They range from a £5 to £30+
The £30+ ones are from NLM. I presume these must be the genuine ones.Mine is a B belt Can anyone advise me on these
Ken

decided to strip the remote resouvar and remove the oil from the shock and refill with 10s fork oil so will see how it perform
Ken

Does anyone have a GOOD Kanguro X1 chainguard, front vented side panels that go under the tank and back light unit they can sell me
Ken

Have decided to partly strip my Kanguro engine as I am completely rebuilding the bike Can anyone lend me or sell me any special tools I might need to strip and set up the engine Also any tips I might need along the way And is there any good specialist Morini engine builders out there at a (reasonabl...

had to cut spindle out with disc cutter. Bushes were knackered and seized.
Having new spindle made and oilite bushes fit, have also fit grease nipple in middle of swinging-arm
And yes the spindle does screw out, thread being on the right side so screws out from the left.

Hi There everyone does anybody know of an alternative rear monoshock (13 1/2ins long)other than a Hagon for my Kanguro X1 My Paioli shock seems to damp ok when stripped without the spring but no one seems to know how the remote air assisted part of the suspension works or how to set it up or whether...

Hi There
A message for Coxey
You said you had a headlight unit for my Kanguro
I'm not all that clever at sending replies via pm's
but just wondered if you actualy got my reply, as I'm very interested
Regards
DBD32

Hi once again
forgot to ask if anyone had an original silencer(2into1) for my kanguro x1 as it had a home made effort fitted
DBD32

Hi There
Anybody out there have a good headlight unit for my Kanguro X1--84?
The one I have seems to be an after market affair as it dosn't fill the surround opening
Cheers and all the best for christmas and new year everybody
DBD32

I think the roadsters have the spindle protruding on the left hand side so that you can get a spanner on it. The kangura has a chrome cover on either side covering the spindle so no means of unscrewing it. Unless mine has been butchered
Any body else with any ideas?
dbd32