MRC Forum- brought to you by www.morini-riders-club.com

Benelli TNT plates fit have a look at the parts interchangability on this forum.

ok after reading your tale of woe. just replace the friction plates, you can get some surflex plates relatively cheaply certainly cheaper than Motohubs hourly rate , I am frankly surprised they have not done it. The oil issue is a red herring don't go there, the whole job can be done in an hour and ...

hi . my old bike, use the corsaro download from this forum its got all the info you need, I serviced your bike for 4 years no problem E10 is fine, tanks do swell but don't get any bigger once they have done there thing, premium gas which is E5 is best as the motors are high comp. enjoy, its a good b...

hi
I have a set of grey plastic hepco and Becker panniers that are for sale, 120 the pair.

Hi re Stews Gp for sale , this used to be my old bike, I owned it for four years having bought it with 6k on the clock, I looked after it very carefully and never had any issues with it, apart from the not very good standard mapping. I have seen the bike recently in Stews ownership and he has upgrad...

Our bikes have the lot, great balance at low speed, sometimes you can almost balance at lights, low curb weight, large tank. Lots of power, well designed high tensile frame and good suspension at least at the rear suspension . The engine is a masterpiece of design and in use, what more can I say, mo...

Great work, I hope it works out and you get to enjoy your bike, I would be interested in your spare swinging arm, if you could message me with a price .
Best Painter

They are not mainstream bikes, and would never give a true value...or appreciate there worth as great Italian motorcycles.

Hi all After some thought and discussions with various experts in aluminium welding, it has been decided not to brace or reinforce, the welds on my swinging arm, they appear to be perfect and the chain tension issue I believe may have contributed significantly to the issue. I am right back where I w...

Yes it is , but there is light at the end of the tunnel, I am bracing mine so will report back .

This old thread is very relevant to the latest breakage with info re the chain adjustment.

Hi mysterG I have been talking with an aero space engineer friend today and it seems it’s possible to weld our swinging arms for additional bracing and to repair existing ones . I am going to get mine crack and dye tested first just out of interest. Really only bracing with 3mm 620/720 alloy plate t...

thanks for posting pics , looks like a catastrophic break as opposed to gradual , which is scary. who is repairing your swinging arm, and how are they going to do it reliably, being a thin wall casting. I did think about seeing if it is possible to add bracing to the pivot points on the arm, let me ...

my swinging arm

Hi Ogri I have just had a dig around, you might have a thermostat malfunction, its staying closed and not allowing the full flow and consequently the correct fluid level /amount, there is a coolant sensor on the body which will still give you a temp reading but will shut the engine down if it gets t...