MRC Forum- brought to you by www.morini-riders-club.com

Oberon Performance MotoMorini clutch slave cylinder http://www.oberon-performance.co.uk/acatalog/MotoMorini.html Bought and fitted as part of fault finding on my clutch only to discover that it was the master cylinder that was faulty. It has seen very little use as I bought another bike not long aft...

Moto Morini Granpasso 2008 Current owner since 2015 when purchased from another member from the forum. UK bike with full service history 34,426 miles Upgrades: Front suspension - Andreani Misano fully adjustable fork cartridges, uprated progressive springs, black nitride coated stanchions, new bushe...

oilburnerbike, Check the connectors from the LH switch gear to the main chassis harness. I had the same issue when turning right although the indicators share the same earth so this is likely the culprit in your case. There had been a dodgy repair done and a wire had come away from the terminal so i...

If you remove the RH switch gear you will find that at the end of the throttle cable the plastic throttle housing bends in on the cable which means it can then go past its stop. I added some heat-shrink to fill out the gap to stop the plastic folding over. Really easy to do and only takes about 20 m...

Hi Chris,

The figure was taken from the GP workshop manual.

It is 32MB so I can prob put it on Google Drive to share if you have an account?

Guys,

Anyone planning on going to this years RTTW on Saturday?

I will be joining the ride in from M40 Warwick Services at 09:30.

Haggs Bank Adventure weekend was a cracking event and I will definitely be going again next year! Ready to go http://i908.photobucket.com/albums/ac285/miguel7751/Mobile%20Uploads/DSC_0005_2_zpsgxybggs6.jpg http://i908.photobucket.com/albums/ac285/miguel7751/Mobile%20Uploads/DSC_0026_zpstc21vqvj.jpg ...

Hi guys,

Chain tension for the GP is below:

Hi guys, Not sure if any of the scrambler, GP, etc... owners are aware of this one so I just wanted to share with you guys: http://haggsbank.com/events/haggs-adventure-weekend-2016/ It came recommended to me by someone I met at the 2016 ABR midlands event so I am going to give it a try. On and off r...

Hi guys,

Has anyone used the CAD model from the link below:

http://humster3d.com/2016/06/15/moto-mo ... 008/#video

Any chance you can put a couple of pics up so I can see how they have done it and how far down it comes?

Hi guys,

Its not a definate but I am hoping to be able to come down for one day over the weekend. It would be nice to meet a few people before the ride to Germany.

Hi guys,

Does anyone know if there is a fender extender available for the GP?

After going down a couple of byways the mud is spraying up onto the radiator and I don't want any stones or gravel doing the same.

Hi guys, Just thought I would put a quick update about my experience. The clutch dragging was down to the oil so as soon as it was replaced the problem went. It's now really easy to pull off all the time. I have dome around 400 miles this week after the service at NLM and it's ran like a dream. They...

Hi Steve, I cant say I have ever looked at the speedo to see how long it takes to settle on zero but next time I am on the bike I will check. How long did it take for your speedo to settle as I have had this on other speedo's which is all down to the sample rate? If its a couple of seconds and seems...