MRC Forum- brought to you by www.morini-riders-club.com

Hi lakoslegal

Sorry, i have missed your reply as i did not get auto announce...
Do you remember which brand of valve stem sealings you are using? Mine are obviously of wrong type as both intakes are covered with oil.
Originals do not fit here as they are for bigger outer diameter valve guide

Hi

Looking for some one who has worn out throttle body over as i broke one butterfly valve (54mm) and need a replacement. Pls see picture

Br,

Hello

How is your oil consumption at the moment?

Hi Iakoslegal

How are your valve guides? Have you checked if intake valves are clean, not covered with debris and engine is not consuming oil? How much have you driven after valve job?

Check this http://www.ital-web.de/forum/viewtopic. ... 8832#48832

Will be continued in here http://www.ital-web.de/forum/viewforum.php?f=25 with more pictures...

Hello

Just made a new product request for air and oil filters for our dear 1200 engine as i feel it deserves best possible filtration. If you feel the same, please make your own request here: https://www.knfilters.com/register/products_needed.aspx

Br,
Vesa

Exhaust valves... As you may recall i was forced to replace one exhaust valve. When i saw how much nicer new exhaust valves was, i could not resist to change them all. Here you have some pictures and arguments why this was a must. Initial plan was to use old exhaust so they are rebuilt as well, but ...

Will be continued in new thread viewtopic.php?f=3&t=5043

Heads are done and ready for coating. Peter at company Virtauskansi did really a first class job. He thinks we might get some 10-15% more flow by this. He also found some nasty brittles on intake seats. Luckily they are horisontally thus not altering tightness. And three pictures... Notice how smoot...

Hi

As a IT professional I sure understand your situation. Unfortunately my limited abilies are on MS side and i presume this site is running on some Unix variant. What kind of help do you need? You can mail to my private address if you prefer.

MickeyMoto wrote:I use a jpeg reduction website and post files <100kB.

May be old fashioned, but it works. You may notice there is no advertising on the website!

Some manual labor done in old fashion way

But thanks anyway. My png pictures got halved in size.

Still hoping for bigger quota...

Grooves and cones done on new bronze valve guides. Pictures of DIY porting or rather smoothing and better fitting parts together. Took maybe 4h
Finishing is done by pro machinist. Peter will sharpen the intake dividers and glas bead blast intake channels.

Hope someone can measure the correct height.

You have right, there should be a auto downsizing and that way it will not harm readability. You can make them quite small when properly done. I also presume write usage of this site is not very intense so DB growth is already quite moderate. Most of time we do not even need pictures to make our mes...

Yes, already hit this 3 images per post limit, but now i hit to some higher level limit that say: no more pictures for you (on this thread) Yes i know this possibility to save pictures on some third system, but that is also a -90 way of doing things. Hope administration are able to make it easy for ...