MRC Forum- brought to you by www.morini-riders-club.com

Success, I sprayed the clips with WD40 and later, I was able to lift the tabs on the clips with a small screwdriver and off they came. The badge just popped off all pins intact. The plastic blob doesn't do anything.
Steve

Thanks for the replies. All pins and clips are in place. There is also a round plastic blob in the middle of the four pins, don't know if this is important. Sounds tricky, guess I will have to give it a go.
Steve

Hi, can anyone advise please how to safely remove and later re-place these badges. I need to re-spray one panel.
Thanks

Hi Graham
Good tip re the left hand carb. Unfortunately the right side carb is leaking. A new gasket set has been ordered from Dellorto France.
So the big kick will have to wait. Good luck with the rebuild.
Steve

It is a Strada.

Hi Graham Yes the carb has been off, the slide freed and it is now back on the bike. I have re-fitted the air cleaner box and note that it rather compromises the throttle action on the left side. Next I will re-fit the tank, bung in some petrol and see what happens when I give it a kick. The electri...

Thanks Graham Yes In can see now that it is the choke cable and how to undo it. The problem I have is that the left carb slide is stuck so I am soaking it in carb cleaner. The bike is going to need some work to get it back on the road. I live in France and have never seen another Morini here unfortu...

Hi
Are there any left please and if so how much to post to France.
Thanks Steve

Hi I am a new member and I am re-commissioning my black morini 500 that has been in a private collection for many years and I am stuck on how to disconnect the carbs from the bike for cleaning. There is the throttle cable and another connection that goes to a metal cylinder on the frame. I don't wan...