Search found 35 matches
- 01 May 2024 12:23
- Forum: Gran Passo
- Topic: Angel eyes.
- Replies: 7
- Views: 550
Re: Angel eyes.
Hi... I cut the plastic clips off the inner part of the ring, otherwise they won't sit flush. Take the light housing off & just silicone the eyes onto the lip of the housing. You haven't a lot of wiggle room. When they are dry, flip over the housing and fix a small bead of silicone inside to sea...
- 30 Apr 2024 15:25
- Forum: Gran Passo
- Topic: Angel eyes.
- Replies: 7
- Views: 550
Re: Angel eyes.
- 13 Apr 2024 11:00
- Forum: Gran Passo
- Topic: GP Engine protection bars
- Replies: 19
- Views: 5730
Re: GP Engine protection bars
Sorted.
- 12 Apr 2024 13:40
- Forum: Gran Passo
- Topic: GP Engine protection bars
- Replies: 19
- Views: 5730
Re: GP Engine protection bars
Prototype... Surely 50% off.
- 06 Apr 2024 19:14
- Forum: Gran Passo
- Topic: Angel eyes.
- Replies: 7
- Views: 550
Re: Angel eyes.
My mistake they are 80mm outer diameter. Auxiliary lights from.. https://www.bikevis.com/product/bikevis-cree-motorcycle-auxiliary-lights/ Bracket off fleabay, initially for a cruiser type bike. Flip it 180° to fit, no huge mods needed other than I had to bend the tangs & fit smaller clamps to t...
- 06 Apr 2024 13:39
- Forum: Gran Passo
- Topic: Angel eyes.
- Replies: 7
- Views: 550
Re: Angel eyes.
Hi.
Purchased mine from AliExpress, but fleabay & Wish
sell them too. Now come in different colours. Amber would look even better imo.
Example...
Purchased mine from AliExpress, but fleabay & Wish
sell them too. Now come in different colours. Amber would look even better imo.
Example...
- 06 Apr 2024 11:45
- Forum: Gran Passo
- Topic: Angel eyes.
- Replies: 7
- Views: 550
Angel eyes.
Well not the real McCoy, but close enough. They are very bright, but not eye blindingly so. Wired up via the front auxiliary light with built in resistors. If I remember correctly they are 90mm diameter & sit just inside the headlight shroud & then clear siliconed into place. You have to tak...
- 06 Apr 2024 10:58
- Forum: Gran Passo
- Topic: Clutch adjustment
- Replies: 2
- Views: 349
Re: Clutch adjustment
Hi... Only the lever on the handlebar adjustment. Is the fluid in the clutch master cylinder discoloured? Sure sign of moisture ingress & a change of fluid + the rubber seals need replacing on the banjo bolt. Done mine twice now & then i purchased an Oberon slave cylinder (yet to be fitted) ...
- 06 Apr 2024 10:38
- Forum: Gran Passo
- Topic: GP Engine protection bars
- Replies: 19
- Views: 5730
Re: GP Engine protection bars
Yarp.... I'm still interested.
Subject to design & pics.
Subject to design & pics.
- 20 Feb 2024 16:25
- Forum: Gran Passo
- Topic: GP Engine protection bars
- Replies: 19
- Views: 5730
Re: GP Engine protection bars
It's been a while.
Any more news regarding engine bars?
Any more news regarding engine bars?
- 10 Oct 2023 22:52
- Forum: Gran Passo
- Topic: Swing arm failure
- Replies: 32
- Views: 15948
Re: Swing arm failure
Hi Ogri I have just had a dig around, you might have a thermostat malfunction, its staying closed and not allowing the full flow and consequently the correct fluid level /amount, there is a coolant sensor on the body which will still give you a temp reading but will shut the engine down if it gets ...
- 10 Oct 2023 22:46
- Forum: Gran Passo
- Topic: Swing arm failure
- Replies: 32
- Views: 15948
- 08 Oct 2023 12:20
- Forum: Gran Passo
- Topic: Swing arm failure
- Replies: 32
- Views: 15948
Re: Swing arm failure
Glad you are OK. Another reason why my faith in this bike is totally shattered. I don't use mine at all after lengthy intermittent problems. Only recently I've done a radiator flush & refill. This came about when checking the coolant level in the rad, only to find about a litre in there & ab...
- 19 Sep 2023 21:22
- Forum: Gran Passo
- Topic: GP Engine protection bars
- Replies: 19
- Views: 5730
Re: GP Engine protection bars
Sounds promising.
- 27 Aug 2023 22:13
- Forum: Gran Passo
- Topic: Fork axle sliders
- Replies: 2
- Views: 2891
Re: Fork axle sliders
Thank you.