MRC Forum- brought to you by www.morini-riders-club.com

Good evening Jen,
Thanks very much for your reply, much appreciated
Kind regards
Mark

How much pre load in turns do I need on the return spring as I am ready to get the cover back on

Having received my new oil pump castings I have fitted the driven and drive opinions and secured the top casting with a trace of Wellseal and new 5mm csk screws in place of the original 4mm screws. I then realised that the mounting holes were 6mm dia instead of 5mm on the original. I understand why ...

Having removed the foot rest points and auto advance unit. The primary drive cover was persuaded to come of with absolutely no brute force and applied ignorance. Oil pump easily removed but dismantling the pump was a different matter it was only just possible to turn it with a spanner on the nut tha...

Thanks Jenny, Steve. Your invaluable help with this is much appreciated. Before I start taking things apart, points for example. What are the ignition timing figures and are there any timing marks. My guess is under the alternator cover plate. I will treat it to a new set of points and condenser and...

Thanks Jenny, Steve. Your invaluable help with this is much appreciated. Before I start taking things apart, points for example. What are the ignition timing figures and are there any timing marks. My guess is under the alternator cover plate. I will treat it to a new set of points and condenser and...

Good afternoon, I have had my recently acquired Corsaro running very smoothly with no nasty noises and running very well. However I have been told horror stories about the alloy the oil pump bodies are made from and the effects of old acidic oil. B&B on Flea bay have them to sell just the castin...

Good afternoon
Has there been any further update on the club providing Date of Manufacture letter or a dating certificate?

Good evening all, I need a new stand rear brake return spring. Ihave seen 2 on Flea Bay from Italy around £20 each.From the same supplier B&B Meccanica part No.KK266 and KK 265. However I am not sure which one to order. Any Idess help would be much appreciated

My Corsaro has no rear brake return spring, does it fit on the centre stand pivot opposite the centre stand spring. I have seen centre stand springs on E bay there are 2 types not sure which would fit my Corsaro but are the the same a brake return spring?

Due to the unavailability of the Clag-Gone tool I now use a wire brush!