MRC Forum- brought to you by www.morini-riders-club.com

Hi, it has been for sale for a while now, started off over 2000 euros, Dean

Hi Mick. I have bought exhausts and lights from them for my Laverda 100, no problems, Dean

Hi, I have a 350 Strada engine for sale. There are no engine numbers on it but a letter A stamped on it. The heads, barrels and cases are removed for inspection. The exhaust threads in the heads are in good condition, the barrels and pistons are good although it needs new rings. There are no carbs, ...

Hi everyone, thanks for all the inquires but the bike is now sold, Dean

I am reluctantly selling my 1989 501 Coguaro, the bike is in bits and has been for nearly 2 years, progress has stalled and all I seam to do is spend money on parts that are not being fitted. I was riding back from France on it when the main bearing failed due to it had only been ridden 240 miles in...

Hi I have a 501 Coguaro, less engine, lots of parts powdercoated, new tyres, rear disc, rear sprocket and Hagon shock and many other new parts, contact me if you are interested and require any pictures, regards Dean.

Hi Mike, crank has been machined to take the roller bearing and new big end shells and have managed to buy all the bearings, seals and gaskets for the rebuild also bought a new alternator/ stator and new pistons/rings ect... The front barrel has recently been rechromed all I need to do now is to put...

Hi Tom, very useful information, thank you very much. Dean

Hi Guys, I have sent my barrel off to be rechromed/ nicasiled and the company are asking what the piston to bore clearance I want , can anyone help me with this information, cheers Dean.
Ps It is off of a Coguaro.

Hi Mike, have just phoned them and after eventually getting through to a human being, its not on there list so they can not help, if i can't find a solution it might end up on ebay, cheers Dean.

Hi Paul, the magnets have broken into small pieces so can not glue them back unfortunately, I have completely stripped the motor so can clean it thoroughly. I think the white metal bush has been spinning in the bush holder as when I took the holder out the white metal bush was moving around inside t...

Hi Mike, hope the Laverda is going well, NLM don't have one at the moment, cheers Dean.

Hi, after 20 years with Laverda I have now returned to Morini with a 501 Coguaro unfortunately it has suffered some engine damage. The right hand main bearing/bush has gone and also the magnets inside the Kokusan rotor have broken away from the rotor.Is the rotor from the Dart, New York, Excaliber e...

Hi, I have recently bought a 501 Coguaro which has a damaged engine can anyone help me out with a Kokusan rotor and stator or just the rotor, cheers Dean.