Search found 2418 matches

by MickeyMoto
07 Apr 2024 18:13
Forum: Tre e mezzo
Topic: Lighting circuit problem
Replies: 16
Views: 1648

Re: Lighting circuit problem

What is the wattage of the headlight? The alternator chucks out about 140W at high revs. Brake light and two indicators are +/- 60 Watts. Add in your headlight and tail light and what is left has to charge the battery. Run at slower speeds, the output drops. My BMW has a voltage of 14volts with no l...
by MickeyMoto
04 Apr 2024 19:19
Forum: The 500
Topic: Kick starting technique
Replies: 7
Views: 381

Re: Kick starting technique

The technique:

Ignition on
Fuel on
Chokes up and
Press button. Electric kick-start is best.
by MickeyMoto
27 Mar 2024 09:27
Forum: Tre e mezzo
Topic: Lighting circuit problem
Replies: 16
Views: 1648

Re: Lighting circuit problem

Perfect.

How satisfying finding a fault that only cost time!
by MickeyMoto
18 Mar 2024 07:20
Forum: Tre e mezzo
Topic: Lighting circuit problem
Replies: 16
Views: 1648

Re: Lighting circuit problem

If you read the blue book there is a section on fault finding the charging circuit. I would say that 12.5 volts across the battery at 5k rpm is a bit low. Your regulator may be faulty.

You may want to check the earthing points, too.
by MickeyMoto
17 Mar 2024 16:37
Forum: Tre e mezzo
Topic: Best 31/2 cam for all-round flexibility?
Replies: 19
Views: 2083

Re: Best 31/2 cam for all-round flexibility?

Thank you, Norbert.
by MickeyMoto
17 Mar 2024 09:07
Forum: Tre e mezzo
Topic: Best 31/2 cam for all-round flexibility?
Replies: 19
Views: 2083

Re: Best 31/2 cam for all-round flexibility?

This is good info.

A Sport piston with a Strada cam is a good option.

I know the 501 nikisil barrels do not fit an500 crankcase, but do the 350 nikisil barrels fit an earlier 350 crankcase?
by MickeyMoto
03 Mar 2024 10:31
Forum: Tre e mezzo
Topic: Best 31/2 cam for all-round flexibility?
Replies: 19
Views: 2083

Re: Best 31/2 cam for all-round flexibility?

Sport cam was used from the first sports up until the later K series bikes where they moved to the M cam. There should be an S Stamped in the cam between the middle lobes, not so helpful if the engine is together, but easy to check what cam you have by measuring with a timing disc. None of the Mori...
by MickeyMoto
29 Feb 2024 18:58
Forum: Tre e mezzo
Topic: Reinstating the electric starter part 2
Replies: 9
Views: 865

Re: Reinstating the electric starter part 2

I would not think Morini could afford a different casing.

Has the linkage been changed, do you have rear sets?

Of course, I could be wrong, not unknown!
by MickeyMoto
24 Feb 2024 08:43
Forum: Tre e mezzo
Topic: Engine woodruff Keys puzzler
Replies: 3
Views: 667

Re: Primary Drive woodruff Key puzzler

I think I have a spare key, if needed.
by MickeyMoto
22 Feb 2024 08:32
Forum: Singles
Topic: 250 anybody?
Replies: 3
Views: 617

Re: 250 anybody?

This one is a bit sad. The provenance is rather lacking. I could understand if it were the bike that came second in the World Championships.
by MickeyMoto
17 Feb 2024 11:35
Forum: Tre e mezzo
Topic: Bottom end strip
Replies: 4
Views: 841

Re: Bottom end strip

Hi, 1. The nuts should be recessed in nut shaped holes. 2. You will probably need to drill out the crankshaft bolts if they do not yield. No idea from where they can be obtained. Re use the old ones if not damaged. 3. Use the special tools, the nut is ft (fantastically tight!). Butchering a socket w...
by MickeyMoto
16 Feb 2024 08:56
Forum: Tre e mezzo
Topic: Oil pump seal variation in sizes/mdina part different?
Replies: 4
Views: 819

Re: Oil pump seal variation in sizes/mdina part different?

I have used the black one but I prefer the old green one. Check the green one carefully, obviously not worth the risk if it is worn.
by MickeyMoto
13 Feb 2024 12:52
Forum: Singles
Topic: 250 anybody?
Replies: 3
Views: 617

250 anybody?

Does this increase the value of my Morini? A 250 single going for a ridiculous price, whatever next?

https://www.motorcyclenews.com/news/202 ... n-results/
by MickeyMoto
08 Feb 2024 10:43
Forum: Bikes and bits wanted
Topic: Morini 501 engine wanted
Replies: 13
Views: 1680

Re: Morini 501 engine wanted

Carts wrote: 07 Feb 2024 19:48 Hi Mickey

Thanks for the advice, any ideas how to look for an engine in Spain.
They sometimes turn up on Car and Classic.
by MickeyMoto
07 Feb 2024 17:43
Forum: Bikes and bits wanted
Topic: Morini 501 engine wanted
Replies: 13
Views: 1680

Re: Morini 501 engine wanted

Don't discount importing an Excalibur from Spain, if you see one.