501 engine bearings and seals

Excaliburs, New Yorks
Post Reply
morini_tom
Posts: 919
Joined: 05 May 2006 13:47
Location: Northampton

501 engine bearings and seals

Post by morini_tom »

Has anyone got a list of all the bearing & seal codes for a 501 engine? (late type 501 although I suspect they're the same parts as early ones)

I am nearing the teardown and want to buy all of the new bearings & seals before I begin so I can dismantle & reassemble in one hit.

No idea why I've never made a list of them before, I've rebuilt more morini engines than I care to remember over the years!

Thanks,
Tom
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

Re: 501 engine bearings and seals

Post by hombre »

If I am not mistaking they are even the same as in any 500 engine (if this helps...)
'It must be a .....'
Posts: 365
Joined: 12 Sep 2010 12:25

Re: 501 engine bearings and seals

Post by 'It must be a .....' »

Hi Tom, you asked this question two years back?
Search the past thread for a list, take care, Ian
norbert
Posts: 750
Joined: 15 May 2007 15:15
Location: Lübeck/Germany

Re: 501 engine bearings and seals

Post by norbert »

These two links in the first message will help :wink:
http://lamaneta.org/foromecanico/viewto ... f87bd2bda8

The site of Agusti is quite interesting and good ilustrated, so it´s worth visiting, even without speaking spanish. It´s a pitty that Agusti only spent about 3 years with the morinis and then turned over to Ducati y Guzzi.

ciao
norbert
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

Re: 501 engine bearings and seals

Post by hombre »

Ah yes, this was an old topic... :)

Good link Norbert!
Post Reply