APTC clutch

Anything to do with the 1200 GranPasso series
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

APTC clutch

Post by toggy »

Hi all
MM have the updated APTC clutch on offer for €720/£613 from €1027 limited offer until 31may 2013, has anyone got the 2013 model bike which these are fitted to ? .im tempted to get it , if there is any interest in my hepco Becker Ali panniers ? ,which I can't actually use now I have the GPR exhaust fitted . £420 including p&p uk only .
http://www.motomorinimotorcycles.eu/ind ... 58&lang=en
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Re: APTC clutch

Post by gianni »

I have the hepco frame fitted with GPR exhaust? what do you mean doesn't fit ?
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

When i first put on the exhaust ,It looked like I would have to modifiy the rear bolt mounting point of the frame to get clearance for the exhaust hanger . Any chance you can post a photo of your set up ? Or email me. Photo ?
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Re: APTC clutch

Post by gianni »

i will make some pictures and mail them bit it will take a few days.

What i needed tot do was buy a longer bolt if I remember, also added some extra washers (I think that is the correct word, round flat rings tha you install between a bolt and a nut)
But i will make some puctures and send them.

I installed exhaust and frame at the same time, i had the impression that frame and original exhaust would give me a problem ...
GPR is slimmer and fits fine
I did ad givi hooks on the hepco frame something "homemade" so if you see the pictures it is no Givi frame :wink:

My biggest problem was to fit the givi topbox rack in combination with the HB rack, this givi rackI had to adapt.
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

I bit the bullet an bought a aptc clutch via the mm site (£661/€748) Quick delivery to my local mm dealer ,mota corsa in dorset . Ordered 13th April received 26th April . Plan is to drop off the bike this sat and pick up next sat . Oil and filter change while its being done and mot . First one mota corsa have done ,gulp! . Get to play with a fireblade or benelli TNT curtesy bike for the week too. I'll report back on the clutch .
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

Hi all ,dropped off the bike to moto Corsa this morning ,leaving it for the week ,to have the clutch changed mini service and mot . I thought id take a photo of the clutch as ill never see it again . see attached photo of the 2013 Adler APTC clutch .
Image
Image
Image
MickeyMoto
Posts: 2426
Joined: 22 Nov 2008 17:41
Location: Even further oop North

Re: APTC clutch

Post by MickeyMoto »

At that price I expected the colour to be gold.... :o
butchamphib
Posts: 104
Joined: 26 May 2010 12:57

Re: APTC clutch

Post by butchamphib »

Was there problems with your old clutch? Mine is slipping at 16,000 miles.
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

No ,my existing clutch is ok , I just wanted to take advantage of the mm sale .also having a lighter clutch will be a lot less tireing when stuck in traffic .i will be keeping the old clutch for reinstalling if I ever sell the bike .
nicko
Posts: 146
Joined: 02 Sep 2011 20:29
Location: Salisbury Wilts
Location: Salisbury, UK

Re: APTC clutch

Post by nicko »

I take it that was your bike I was looking at when at Motocorsa on Saturday then, it appeared to be in good condition and well looked after.

Cheers
Nick
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

Yes ,that my my grey beast ,still needs a bit of TLC here and there but goes well .
What was the purpose of your visit to moto corsa ?
nicko
Posts: 146
Joined: 02 Sep 2011 20:29
Location: Salisbury Wilts
Location: Salisbury, UK

Re: APTC clutch

Post by nicko »

Picking up my Corsaro after replacement of chain and sprockets.
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

Ah ,that would be your black and silver corsaro in the workshop then .
Image
nicko
Posts: 146
Joined: 02 Sep 2011 20:29
Location: Salisbury Wilts
Location: Salisbury, UK

Re: APTC clutch

Post by nicko »

That's the one, lurking at the rear.
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: APTC clutch

Post by toggy »

Yah
Got bike today . Sweet! clutch . Clutch engages /disengages as normal standard ,lever action is as promised 50% easier to pull . Highly recomended mod if you have the wonga spare . Mike from moto coarse recons it's very trick !
Standard clutch
Image
Post Reply