heated grips cabling?

Anything to do with the 1200 GranPasso series
Post Reply
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

heated grips cabling?

Post by gianni »

Installed fog light from givi this weekend loos fine

thinking about connecting heated grips anybody know where the original cabeling or connectors are
I only found ons connector with tree cabels in it (under the controlpanel) is this the one or are it two independent ones?
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: heated grips cabling?

Post by toggy »

Hi
Hope this helps ,see links for heated grips wiring diagram and photos of wiring harness.

https://www.dropbox.com/s/7f814mldvot63 ... 5%2033.jpg

https://www.dropbox.com/s/78lswb0pxz1d2 ... 7%2031.jpg

https://www.dropbox.com/s/8g79pyr6x748z ... 8%2010.jpg

https://www.dropbox.com/s/gs2yob3wtyqcm ... 8%2039.jpg

Ps ,I think the throttle side grip is not fit for purpose. When I bought the bike ,the heated throttle grip was not working .the cable had broken where it exists the grip . The replacement has lasted 14 mths ,the cable on that has broken on the exit of the grip too. I had even strengthened the cable with insulation tape and it still broke . They are rubbish quality for the excessive amount they sell them for .
günni
Posts: 42
Joined: 01 Mar 2013 23:30
Location: germany
Location: germany

Re: heated grips cabling?

Post by günni »

gianni wrote: thinking about connecting heated grips anybody know where the original cabeling or connectors are
I only found ons connector with tree cabels in it (under the controlpanel) is this the one or are it two independent ones?
hi gianni,
you will find the connector behind the ride fuel tank cover. i hope my photos can help.

günni
Attachments
heizung7.jpg
heizung7.jpg (114.82 KiB) Viewed 11392 times
heizung1.jpg
heizung1.jpg (197.54 KiB) Viewed 11392 times
sbarazzino 98, corsaro 125, corsaro 150, corsaro 1200, scrambler
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Re: heated grips cabling?

Post by gianni »

thanks a lot !!!

I have a pare of aftermarket ones (oxford) connecting them tho these plugs with this info is easy
In this I can use the standard button than to controll them

Aftermarket and original ones both work on 12V so I don'think this will give problems

I will give feedback if it works
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Re: heated grips cabling?

Post by gianni »

feed back will take some more time .....

stupid accident yesterday

standing still behind a van at a crossing
suddenly he starts rdiing backwards ...what the f...

hitting me and driving partly over the bike ????? and my leg blocked under the bike ....

idiot ! :shock:

bike is at service center at the moment
fortunatly i have fust some bumps and scratches but i am fine :P
took out the ducati later that day for a spin yesterday to clear my head
User avatar
toggy
Posts: 282
Joined: 10 Apr 2009 17:06
Location: United Kingdom,Poole

Re: heated grips cabling?

Post by toggy »

I'm refurbishing my heated grips due to the throttle side cable breaking for the second time .i found the original cable approx 4mm diameter twin core to be lacking ,ie cheap rubbish,and have replaced it with flexible microphone cable from maplin (£1.49 per metre) I found the 12v13w heating element poorly positioned . Just where your finger tips naturally rest there is a big gap ,see photo .

Image
The element is not positioned centrally either
Image
günni
Posts: 42
Joined: 01 Mar 2013 23:30
Location: germany
Location: germany

Re: heated grips cabling?

Post by günni »

the most of my bikes i had upgraded with heating cartridges of COOLRIDE.
no breaking cables any longer!

regards
günni
sbarazzino 98, corsaro 125, corsaro 150, corsaro 1200, scrambler
Post Reply