Neutral Indication

Anything to do with the 1200 GranPasso series
Post Reply
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Neutral Indication

Post by gianni »

Have some problems with the neutral indication
It keeps on indicating even in gear.

After a while the indication start to flash and works correct for a period

But after having the bike standing still for a night or having the bike in neutral while with running engine for a few minutes the problem is back.

Anybody know how to fix this problem

Have diconnected the connection (small plug next to the gear shifter) when problem is ocurring but the indication goes off which gives me the idea it is no dammaged cabel but a problem with the neutral indication in the gearbox
MonstroMorini
Posts: 81
Joined: 20 Feb 2011 15:48
Location: Wormer, Netherlands

Re: Neutral Indication

Post by MonstroMorini »

Take out the neutral sensor and check if it works correctly. If so, experiment with different thickness washers, was a common problem with the early corsaro's.
gianni
Posts: 36
Joined: 14 Nov 2012 15:12
Location: Belgium Baal

Re: Neutral Indication

Post by gianni »

Problem was almost always the last weeks

Yesterday I replaced the washer, quit easy to do and indication runs perfect now

thanks a lot !
Post Reply