dash diagnostics

Anything to do with the 1200 Corsaro series
Post Reply
roofus
Posts: 34
Joined: 11 Jun 2012 11:26
Location: southampton
Location: southampton uk

dash diagnostics

Post by roofus »

i always seem to have the same error on the diagnostics it reads engine relay s/c ground

where exactly is the engine relay ?
bike is running fine
thanks in advance
User avatar
Chips1953
Posts: 408
Joined: 02 Dec 2011 14:05
Location: Carlilse

Re: dash diagnostics

Post by Chips1953 »

I may be wrong but the 2 relays pictured on this shot to the left and below the fuses are what you are after.
The picture comes from page 68 11/06 of the Manual.
If you don't have the manual then either Twisty, DaveH or Corsaro Chris may help. The manual uses full colour plates and good description.
The front 3 relays are to do with lights etc. ( behind the Cupola).
With my Corsaro I have found cables with friction wear, so perhaps you have to investigate the loom. New relays are available, check out the compatibility list.
Good Luck, I'm sure that others will be able to help as well. I had a lot of help with my leaking fuel tank.
Attachments
relays.jpg
relays.jpg (132.49 KiB) Viewed 8464 times
Singer 185K
Wheel Horse commando 7
Honda SS90 1965
roofus
Posts: 34
Joined: 11 Jun 2012 11:26
Location: southampton
Location: southampton uk

Re: dash diagnostics

Post by roofus »

thanks George will take a look asap :)
DaveH
Posts: 113
Joined: 22 Apr 2010 22:07

Re: dash diagnostics

Post by DaveH »

PM me if you need a copy of the manual.
Dave H


Ducati Multistrada 1200S DVT :)
Moto Morini Corsaro 1200 :lol:
Beta RR300 :mrgreen:
roofus
Posts: 34
Joined: 11 Jun 2012 11:26
Location: southampton
Location: southampton uk

Re: dash diagnostics

Post by roofus »

many thanks dave
the 2 relays look fine and cant see any suspect wiring
away for couple of weeks now when back will see if it throws up fault again
roofus
Posts: 34
Joined: 11 Jun 2012 11:26
Location: southampton
Location: southampton uk

Re: dash diagnostics

Post by roofus »

Cleaned up relays and put some miles on it
No more errors so fingers crossed
Post Reply