Valve adjusting shim

Anything to do with the 1200 Corsaro series
Post Reply
Stauch
Posts: 31
Joined: 08 Oct 2013 10:08
Location: Mosca

Valve adjusting shim

Post by Stauch »

Hi eweryone. Who knows, What outer diameter of the valve adjusting shims on Moto Morini Corsaro 1200? Thank you
twisty
Posts: 352
Joined: 05 Jul 2008 16:49

Re: Valve adjusting shim

Post by twisty »

10mm

KTM (some models) shims
and harley v rod
Stauch
Posts: 31
Joined: 08 Oct 2013 10:08
Location: Mosca

Re: Valve adjusting shim

Post by Stauch »

Ok. Thank you very much. In near future i am going to overhall valves. Thanks
User avatar
72degrees
Posts: 1549
Joined: 31 Aug 2007 21:24
Location: West Midlands

Re: Valve adjusting shim

Post by 72degrees »

twisty wrote:10mm

KTM (some models) shims
and harley v rod
Rats. YZ450F uses 9.48 diameter and they are very easy to get hold of. Only in 5mm intervals though despite the factory using greater precision on the first build. After doing that (one inlet but both cams have to come off)) and just checking the KTM 350SXF I'm not in a hurry to shim anything else.
Post Reply