Marzocchi front bushes

Anything to do with the 1200 Corsaro series
Post Reply
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Marzocchi front bushes

Post by eddydog »

Hi. I want to buy it http://www.ebay.com/itm/171924674687?eu ... =ext,bu=bu
Seller answered me
hello,
thank you for the enquiry.
they are innteck branded.
the sizes of these bushings are 50x55x15 and 49x51x20.
please measure your vehicle to check compatibility as you vehicle is not listed.
thank you

It is real our MM Corsaro 1200 for Marzocchi 50 mm fork?
torque
Posts: 50
Joined: 25 May 2015 19:02
Location: preston uk
Location: preston

Re: Marzocchi front bushes

Post by torque »

Benellis and some older mv bikes use the magnum 50s you could try emailing moto corsa in the uk edmund the parts man is very helpful :)
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Re: Marzocchi front bushes

Post by eddydog »

I know Marzocchi 50 used on many bikes, but i dont know phisical size and ask about.
torque
Posts: 50
Joined: 25 May 2015 19:02
Location: preston uk
Location: preston

Re: Marzocchi front bushes

Post by torque »

Well eddydog you are going to have to bite the bullet and strip your forks and measure your bushes What kilometers has your bike done
backfat1187
Posts: 124
Joined: 13 Mar 2011 23:11
Location: Leicestershire UK
Location: Leicester, UK

Re: Marzocchi front bushes

Post by backfat1187 »

eddydog, just checking it's not a Veloce???
Reason I ask is I have the old bushes from mine when I did the forks. I'll measure them tomorrow.
Anyone know if the Corsaro and Veloce forks share the same bushes?
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Re: Marzocchi front bushes

Post by eddydog »

Hi. I looked service manual and see different stem type between Veloce and Corsaro models. My is Veloce. I think i not hurry and wait two week when season in sibiria was finished and i will dismantle fork and check bushes myself.
Post Reply