CNC Adjustable Steering Damper

Anything to do with the 1200 Corsaro series
Post Reply
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

CNC Adjustable Steering Damper

Post by eddydog »

Hi everyones. I found its device. CNC Adjustable Steering Damper from China. Price is 100 usd. + -, There is three or four modification, copy of famous dampers. My mind is busy its. But construction ours Corsaro not fit for same. What do you think about? Is there possybilities to mount its on Corsaro? In thise week i found one way. Black model has same distance beetween brakets bolts, but black item has different centre line between main centre and centre line its bolts. But body has some place for different drilling. If drill new holes, fit our upper travers side, and cut original wheels bracket and place its over damper, what think about? You can look for on aliexpress wit words CNC Adjustable Steering Damper Motorcycle Stabilizer.
Guys, maybe among us there are real engineers who will use their knowledge and offer a version with minimal homework? A? Is there anyone else on this forum with smart brains? Or are you in Europe only know how to make purchases in stores?
Attachments
s-l1600 (5).jpg
s-l1600 (5).jpg (173.72 KiB) Viewed 6823 times
s-l1600 (4).jpg
s-l1600 (4).jpg (101.56 KiB) Viewed 6823 times
HTB1As3bLXXXXXXMXpXXq6xXFXXX3 (1).jpg
HTB1As3bLXXXXXXMXpXXq6xXFXXX3 (1).jpg (75.48 KiB) Viewed 6823 times
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Re: CNC Adjustable Steering Damper

Post by eddydog »

Its set for Ducati Monster. Who knows, distance between bolts on Ducati has same size as on Corsaro? Ignation lock is the same.
https://www.aliexpress.com/item/For-DUC ... 85d69a0932
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Re: CNC Adjustable Steering Damper

Post by eddydog »

Hello everybody. Continuation. This device was purchased. Since our motorcycle does not have factory adapters, I decided to do it myself. See what happened as a result. The steering wheel was raised a couple of centimeters to place a damper under it and between the traverses. The locking plate easily became on the ignition lock. It was necessary to file a little protruding details. Decorative
Attachments
IMG_1333.JPG
IMG_1333.JPG (112.21 KiB) Viewed 6127 times
IMG_1331.JPG
IMG_1331.JPG (102.87 KiB) Viewed 6127 times
IMG_1328.JPG
IMG_1328.JPG (117.1 KiB) Viewed 6127 times
eddydog
Posts: 62
Joined: 08 Nov 2015 12:54
Location: Novosibirsk
Location: Russia

Re: CNC Adjustable Steering Damper

Post by eddydog »

Next fotos.
Attachments
IMG_1340.JPG
IMG_1340.JPG (111.8 KiB) Viewed 6126 times
IMG_1338.JPG
IMG_1338.JPG (138.1 KiB) Viewed 6126 times
IMG_1335.JPG
IMG_1335.JPG (93.67 KiB) Viewed 6126 times
Post Reply