MRC Forum- brought to you by www.morini-riders-club.com

Hello !
I am new to this bike . And I have the only one in Norway

We had some trouble with the air pressure sensor - and had to enter the diagnose arena in the menu / computer - when we did this the button jammed and it sees to remain in «pushed in». Position.

Anyone experienced this - and can the dashoboard be opened to fix this ?

The bike is a very nice experience - have some Guzzi´s and this is something different


Kind regards from Norway

This button can be a problem on Corsaro and 91/2.

Have a look at the posts over in the Corsaro section of this forum for some suggestions:
http://www.morini-riders-club.com/foru ... f=2&t=3829

Let us know how you get on

Welcome to Morini 1200 ownership.

The dashboard does separate, carefully. The rubber knob can then be repositioned. On assembly you will need to ensure the joint is water tight.

I have a 9 1/2 my fascia was damaged and the button often got stuck so I got another 2nd hand clock the facia on my clock came off very easy the 2nd hand was not as easy but did get the facia off without damage it. the button no longer sticks.