Hi Guys
My efforts to find a swan neck kickstarter and displacer have hit a brick wall.
I was wondering if anyone have any technical drawings with dimensions for the them that you could please send so I can look at manufacturing one, seeing as it is almost impossible to find them.
If you do have any drawings could you please send to petchalmo@optusnet.com.au
Your assistance would be greatly appreciated.
Thanks in advance.
Kind Regards
Ponch
Swan neck kickstarter and Displacer Block Drawings
Swan neck kickstarter and Displacer Block Drawings
- Attachments
-
- Swan neck.jpg (152.99 KiB) Viewed 4309 times
Re: Swan neck kickstarter and Displacer Block Drawings
a little late, but maybe you can use this ?
and to prevent killing your tarrozzi's when the kickstarter is moved too far
use something like this
HTH
Raymond
and to prevent killing your tarrozzi's when the kickstarter is moved too far
use something like this
HTH
Raymond
Re: Swan neck kickstarter and Displacer Block Drawings
Hi Raymond
Thanks for the pictures. Any chance you have a few dimensions to go with them?
Ponch
Thanks for the pictures. Any chance you have a few dimensions to go with them?
Ponch
Re: Swan neck kickstarter and Displacer Block Drawings
to get an idea off the size ....every blue square = 5mm x 5mm