Help!!! Morini wont start!!!
Help!!! Morini wont start!!!
HI all!
i try to start my morini 501 but he cant start.I set up belt on marks,i set valve,i watch video on yt about paul how to put pick up so i put it like he show on video but nothing morini wont start,only sometimes fire from exhaust.when i turn pickup on aonther side morini kick back and he almost start;
what i need to do now i do all like shows in manual and in videos but nothing,only when i turn pickup on another side he almost start.
someone please help i need to start him allready
i try to start my morini 501 but he cant start.I set up belt on marks,i set valve,i watch video on yt about paul how to put pick up so i put it like he show on video but nothing morini wont start,only sometimes fire from exhaust.when i turn pickup on aonther side morini kick back and he almost start;
what i need to do now i do all like shows in manual and in videos but nothing,only when i turn pickup on another side he almost start.
someone please help i need to start him allready
"Riding a bike is an Art , something you do because feel something inside"
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
Re: Help!!! Morini wont start!!!
Was it running before you replaced the belt?
Re: Help!!! Morini wont start!!!
yes!
"Riding a bike is an Art , something you do because feel something inside"
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Help!!! Morini wont start!!!
Is the belt out by 180 degrees? If you bring the front cylinder to TDC on the compression stroke (both valves closed) the timing mark on the camshaft pulley should be at the bottom out of view, not at the top. Well, mine is and it starts.
Mike.
Mike.
Re: Help!!! Morini wont start!!!
Like Mickeymoto says, TDC on the front cylinder, valves closed.
Hope you get it going.
Alan.
Hope you get it going.
Alan.
Re: Help!!! Morini wont start!!!
i do all what you say but still doesnt start! any idea
"Riding a bike is an Art , something you do because feel something inside"
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Help!!! Morini wont start!!!
Please and thank you is a good start.
So, belt correct. Timing marks set for static timing - knobbly bit of flywheel in centre of pickup with timing marks lined up.
Both coils have power. Spark at plug when kicked. Carbs clean.
If all set then it will start without kicking back.
Are you an MRC member? If so you can download the later engine manual.
Mike.
So, belt correct. Timing marks set for static timing - knobbly bit of flywheel in centre of pickup with timing marks lined up.
Both coils have power. Spark at plug when kicked. Carbs clean.
If all set then it will start without kicking back.
Are you an MRC member? If so you can download the later engine manual.
Mike.
Re: Help!!! Morini wont start!!!
[quote="MickeyMoto"]Please and thank you is a good start.
Can you say that in Bosnian, please?
Can you say that in Bosnian, please?
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Help!!! Morini wont start!!!
molim i hvala. !!Ming wrote:MickeyMoto wrote:Please and thank you is a good start.
Can you say that in Bosnian, please?
Re: Help!!! Morini wont start!!!
can someone of you make some video of instuctions or does someone of you have viber or whatsapp to help me more about this problem
"Riding a bike is an Art , something you do because feel something inside"
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
Re: Help!!! Morini wont start!!!
Have a look at EVguru's videos on youtube. That might help.
https://www.youtube.com/user/EVguru/videos
https://www.youtube.com/user/EVguru/videos
-
- Posts: 65
- Joined: 27 Jan 2016 17:54
- Location: Clqypole UK
- Location: Nr Newark Lincs
Re: Help!!! Morini wont start!!!
Dobro jutro Kelly,
As mentioned previously try what Paul Compton advise me! See below.
When I have a bike turn up with no spark, I break it down to the most basic setup.
Pull all green wires from the fuse panel.
Connect the green wire from the alternator directly to the ignition boxes.
Sretno
Archie
As mentioned previously try what Paul Compton advise me! See below.
When I have a bike turn up with no spark, I break it down to the most basic setup.
Pull all green wires from the fuse panel.
Connect the green wire from the alternator directly to the ignition boxes.
Sretno
Archie
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Help!!! Morini wont start!!!
Hello,
I think I misread this. Is it Ducati or Kokusan ignition?
Mike.
I think I misread this. Is it Ducati or Kokusan ignition?
Mike.
Re: Help!!! Morini wont start!!!
Ducati!
"Riding a bike is an Art , something you do because feel something inside"
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
--------------------------------------------------------------------------------------
Bikes:
Moto Morini 350 X2
Moto Morini 501 supermoto
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: Help!!! Morini wont start!!!
ah, OK. Was thinking it was Kokusan. Have you checked the trigger wires are going to the correct transducers?