Possible disc replacements

The 3 1/2 forum
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Possible disc replacements

Post by Papa Lazarou »

Having searched this site and found that a Ducati 600tl rear disc has been used with success to replace the front disc on a Sport, I now know that the disc is 260mm (10.7") with a 25mm off set. Obviously, it has 6 holes.

A search of the internet appears to show that BMW, Ducati, Moto Guzzi, Triumph and Norton (plus the odd conversion on other bikes, eg a Harris Matchless) also used the same disc.

Norvil makes 260mm discs. Some Meriden Triumph parts stockists have 4 and 6 hole discs. Links: http://www.norvilmotorcycle.co.uk/ (part number 069711) and http://www.classicmotorcyclespares.com/ ... s_&_Brakes (part number 37-7079).

These may or may not fit? Any knowledge out there?
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Re: Possible disc replacements

Post by Papa Lazarou »

I've found a Moto Guzzi disc of the correct vintage for little money. If the offset is the same, this should fit. I'll post up the results.

Results: offset on this one is 40mm. Too much.
User avatar
Paz2112
Posts: 126
Joined: 07 May 2015 12:32
Location: Northern Ireland
Location: Northern Ireland

Re: Possible disc replacements

Post by Paz2112 »

I would be interested in also replacing by front disc if the correct one could be found.
My Other Italian V-Twin is an Italian V-Twin
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Re: Possible disc replacements

Post by Papa Lazarou »

I don't need to replace mine now I've fixed the master cylinder-I can live with a bit of rust. It might be worth your while contacting Norville on the link above, or old Ducati specialists.
User avatar
Paz2112
Posts: 126
Joined: 07 May 2015 12:32
Location: Northern Ireland
Location: Northern Ireland

Re: Possible disc replacements

Post by Paz2112 »

When you say you fixed the front brake, what exactly did you do. My caliper and master cylinder are both fully serviced and working but I still find the front brake to be too poor in braking power, squeely as hell and wooden in nature. My front disc is original and in good enough condition but it was made from a chromed steel most likely to prevent it from rusting. Using softer pads from NLM is not really making enough of a difference.

I still think I am going to change both the disc and the master cylinder.
My Other Italian V-Twin is an Italian V-Twin
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Re: Possible disc replacements

Post by Papa Lazarou »

It was pretty simple to fix the front brake.

The Morini master cylinder, like Norton Commandos of the period, has too big a bore. You can buy a small bore kit for a Commando, which sleeves the bore down.

I bought a cheap Chinese front brake with a small bore master cylinder (although anything Japanese, say for a GN125, 250 etc) would do just as well. This gets rid of the wooden feeling and makes the brake nearly as good as a modern one. It's not an expensive fix.

You shouldn't need to change the disc, although getting the chrome stripped off would help.

Keep the original, just in case a future owner is worried about originality...and wants to return to a useless brake.
User avatar
72degrees
Posts: 1549
Joined: 31 Aug 2007 21:24
Location: West Midlands

Re: Possible disc replacements

Post by 72degrees »

Papa Lazarou wrote:Keep the original, just in case a future owner is worried about originality...and wants to return to a useless brake.
The alternative is a 250 2C master cylinder which looks pretty much identical but smaller bore. I suspect those are now like hens teeth though.
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Re: Possible disc replacements

Post by Papa Lazarou »

72degrees wrote:
Papa Lazarou wrote:Keep the original, just in case a future owner is worried about originality...and wants to return to a useless brake.
The alternative is a 250 2C master cylinder which looks pretty much identical but smaller bore. I suspect those are now like hens teeth though.
this one might do-eye watering price tho
http://www.ebay.co.uk/itm/LAVERDA-GUZZI ... 1956490378

Gutsibits have a wide choice of new and used master cylinders. http://www.gutsibits.co.uk
User avatar
Daddy Dom
Posts: 512
Joined: 16 Nov 2006 19:48
Location: Auckland, New Zealand

Re: Possible disc replacements

Post by Daddy Dom »

Since the OP, brand new discs have become available from NLM.
DD
MRC 3082½
Papa Lazarou
Posts: 156
Joined: 10 Nov 2016 09:42
Location: Sussex

Re: Possible disc replacements

Post by Papa Lazarou »

Daddy Dom wrote:Since the OP, brand new discs have become available from NLM.
DD

man y thanks for the news. price?
User avatar
P&S
Posts: 84
Joined: 21 Oct 2017 18:18
Location: Rome Italy
Location: Roma

Re: Possible disc replacements

Post by P&S »

User avatar
Paz2112
Posts: 126
Joined: 07 May 2015 12:32
Location: Northern Ireland
Location: Northern Ireland

Re: Possible disc replacements

Post by Paz2112 »

This is the disc that I bought from NLM and which sorted my brake problems and gave me great feeling brakes with no squeal. They also look superb.

Image
My Other Italian V-Twin is an Italian V-Twin
User avatar
P&S
Posts: 84
Joined: 21 Oct 2017 18:18
Location: Rome Italy
Location: Roma

Re: Possible disc replacements

Post by P&S »

Yes, really nice.
Is it more or less expensive?
What worries me with this replacements is if in case of the second disc on the right there is enough room for the odometer cable.
What do you think?
User avatar
Paz2112
Posts: 126
Joined: 07 May 2015 12:32
Location: Northern Ireland
Location: Northern Ireland

Re: Possible disc replacements

Post by Paz2112 »

It was a similar price and worth the money. It is very well made. I would like to add the second disc to the right hand side sometime in the future and it looks like it would be possible with a little fettleing.
My Other Italian V-Twin is an Italian V-Twin
Steve Brown
Posts: 1390
Joined: 12 Nov 2007 23:44
Location: Leicestershire

Re: Possible disc replacements

Post by Steve Brown »

This looks like a good replacement! You say it gives better feel etc, is that with the standard master cylinder still in place?
All donations to the rest home for old Camels, Leicestershire.
Post Reply