Levers

The 3 1/2 forum
Post Reply
Bison
Posts: 132
Joined: 27 Mar 2013 10:49
Location: West Lothian

Levers

Post by Bison »

Hello folks,
I seem to remember reading about alternative brake/clutch levers that will fit onto my 3 1/2 Sport, from a Yamaha or a Suzuki?, anyone have any ideas?.
Thanks,
Alan
George 350
Posts: 450
Joined: 16 Jun 2007 09:43
Location: Northampton

Re: Levers

Post by George 350 »

Hi.
I have used Yamaha RD250/350 brake levers in the past (pretty LC) when genuine Grimeca ones were not readily available.
Profile is almost identical, but the 'adjuster' has a different thread, so make sure you get that with the lever.
Never found a decent fitting alternative clutch lever whenever I needed one though.
George
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
User avatar
72degrees
Posts: 1549
Joined: 31 Aug 2007 21:24
Location: West Midlands

Re: Levers

Post by 72degrees »

Domino do a brake lever that fits, with the correct thread for the adjuster but the lever is a bit shorter.
http://www.splatshop.co.uk/domino-f-bra ... 0wodQhEFKg
jfh
Posts: 17
Joined: 31 Mar 2008 14:40
Location: Cornwall

Re: Levers

Post by jfh »

I found an MZ (disk brake model) lever fitted on my 350 strada.
Post Reply