Clutch release rod orientation

The 3 1/2 forum
Post Reply
R1100purist
Posts: 51
Joined: 18 Jun 2020 11:46
Location: Virginia Beach, VA
Location: Virginia Beach, VA

Clutch release rod orientation

Post by R1100purist »

Hi all, hopefully you’ll be seeing more me here as I start my restoration of my 1984 Moto morini 350 K2, but I have a head scratcher today.

I forgot to take photos on disassembly of my clutch throw out/release rod assembly. Also I can’t find the pictures anywhere online, but which side does the slight “scoop” in the rod face? Towards the clutch hub or back towards the release arm?

Thanks,
Owen
mbmm350s
Posts: 666
Joined: 22 Jun 2018 10:18
Location: Reading UK
Location: Berkshire UK

Re: Clutch release rod orientation

Post by mbmm350s »

Hello Owen
Welcome to the forum.

I wasn't aware that any of the clutch pushrods had a scoop or depression on any of the rod faces.
The larger diameter one can be worn by the smaller diameter one.
Can you post a picture.
Mark
R1100purist
Posts: 51
Joined: 18 Jun 2020 11:46
Location: Virginia Beach, VA
Location: Virginia Beach, VA

Re: Clutch release rod orientation

Post by R1100purist »

Thank you Mark, and I will have to search for the piece as I just getting settled after a move but already thinking about the rebuild and this was one of my outstanding questions I loose sleep on ;).
Post Reply