L5 cam

[fastharry]

Urgently needed, Has anyone got an L5 cam to sell or hire? I am currently building a 350 flattrack racer to run in the UK shortrtack series, i have been advised to use the L5 Profile, if theres not one for sale im willing to pay to hire one + large deposite,I have a cam guy of well renound who will make a master,but we need a physical cam to copy,anyone out there who can help? 07885 458837,

[MickeyMoto]

Go to the Links part of this site and click on

Herdan - USA: www.herdan.com/morini

He has advertised....

120403E camshaft L5 $132.70

Mike.

[EVguru]

Go to the Links part of this site and click on

Herdan - USA: http://www.herdan.com/morini

He has advertised....

120403E camshaft L5 $132.70

Mike.

Herdan don't have any! Hermy rarely updates his website and has far wider range of parts than is shown there. You have to phone and be in his good books.

I bought Hermy's last L5 and 2+2 a couple of years ago. I had them mastered and have copies of the 'L' cam on the shelf.

[MickeyMoto]

fastharry,

see EVguru!

Mike.....

[leos]

I know there has been no action on this topic for some time but since i am new on this forum i want to ask if you can supply the L5 cam?

[EVguru]

Myself and Tom have been collaborating on some cam research.

I should be able to provide cams soon, but I want to be sure just what I'm supplying first.

The 'L' vs 'L5-I' vs 'L5-II' debate has yet to be settled.

[norbert]

A lot of people said that the L and L5 both were marked only with L. But there are cams marked with L5!

I allways thought that the 501 from the Camel Electric Start has a L5. But when I had to open the motor a few years ago there was only a L on the cam A friend of mine opened two 501 from the Coguaro and found ...L

I still wonder where the L5 I had in my hands some years ago do come from

It is posible to change a 350 cam (sport or strada) to an L5. It´s not possible to do the same starting with a 500 cam, because you need the bigger "groundcircle" of the 350 cam to achieve the Lift of 5,95/5,65

Last two times we spent about 100-120 € for each cam, giving them about 10 units.

k-IM000939.JPG (28.13 KiB) Viewed 22506 times

k-DSCI0002.JPG (59.3 KiB) Viewed 22506 times

norbert

[Tom]

Looks like camshaft heaven to me Norbert

[leos]

Hello,

Again no action for some time. Already some more information on availability?

[72degrees]

I might need one (apart from the one already in the 2c/375) as well.

Any info on where I might get a 350 Strada cam reground to L5 in the UK?

[EVguru]

We're getting closer. Hopefully I'll be doing some cams soon.

[vintracer]

Hello;I would also be interested in buying a cam.Cheers Wayne.

[leos]

Soon would be nice. I'm waiting on my crankshaft at the moment. It is being modified for a roller bearing on the right hand site. It would be nice if i can put the engine back together again with the L5 can in it. I can then have a test on the dyno to look what the performance will be next year.

[Bison]

Pretty sure Ducati developments in Dortmund can supply a cam, reground to L5 spec, exchange, look them up, the guy who runs it is very helpful.
Alan.

[leos]

Thanks Alan. Did contact them and they charge 170 euros for a reshape of a Touring or Sport cam shaft.