Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
footpegs and gear/ brake levers Kanguro X , X1, X2 5 euro's a piece, 10 Euro's for the linked set
Plastic surround Kanguro X3/ Camel 501 5 euro's
Front Fender X3/ Camel 501 10 euro's
Exhaust heatshield square framed Camel/ Kanguro: 15 euro's
]
Set of side panels square framed Camel/ Kanguro, one with minor crack, finish is suberb though 25 euro's
Front fairing with CEV 254 headlight for square framed Kanguro/ Camel 501, new paint and stickers!: 75 euro's
Chain adjusters set, suitable for all Enduro's with square tube swing arm 10 Euro's
Bellypan Kanguro x & x1 10 Euro's
tomros@live.nl
the Netherlands
Plastic surround Kanguro X3/ Camel 501 5 euro's
Front Fender X3/ Camel 501 10 euro's
Exhaust heatshield square framed Camel/ Kanguro: 15 euro's
]
Set of side panels square framed Camel/ Kanguro, one with minor crack, finish is suberb though 25 euro's
Front fairing with CEV 254 headlight for square framed Kanguro/ Camel 501, new paint and stickers!: 75 euro's
Chain adjusters set, suitable for all Enduro's with square tube swing arm 10 Euro's
Bellypan Kanguro x & x1 10 Euro's
tomros@live.nl
the Netherlands
Last edited by Tom on 20 Apr 2020 10:03, edited 13 times in total.
Re: Enduro parts: Kanguro X1 XE Camel 501
Hello Tom ,
Belly pan please , if it's still available..
I'll PM you.
Belly pan please , if it's still available..
I'll PM you.
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
I have some more parts available now, see top of this post
-
- Posts: 483
- Joined: 15 May 2016 16:34
- Location: High Wycombe
- Location: High Wycombe Area (Bucks)
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Tom,
If you still have the rear footbrake lever for the X (cable drum brake) please can I buy it? also if you've the set of footrests without rubbers (the ones that look less rusty) they'd be useful. There's no rush for these, they'd be spares for a Kanguro X I bought several months ago and am slowly getting back in working order.
Thanks, Julian
If you still have the rear footbrake lever for the X (cable drum brake) please can I buy it? also if you've the set of footrests without rubbers (the ones that look less rusty) they'd be useful. There's no rush for these, they'd be spares for a Kanguro X I bought several months ago and am slowly getting back in working order.
Thanks, Julian
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Hi Julian,
Yes sure, it's been very quiet...
Give me a call when you need them.
Tom
Yes sure, it's been very quiet...
Give me a call when you need them.
Tom
-
- Posts: 483
- Joined: 15 May 2016 16:34
- Location: High Wycombe
- Location: High Wycombe Area (Bucks)
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Tom, will do. I see you've some NOS parts, so I might also have one or two of those when the bike's closer to needing them. I'm still doing major work to sort out the fundamentals: ignition, swingarm, stands, wiring, lights, and engine condition!
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Hello Julian, Let me know which parts you will exactly be needing and i can set them aside for you for a while.
Or email me on: tomros@live.nl
Ciao, Tom
Or email me on: tomros@live.nl
Ciao, Tom
-
- Posts: 483
- Joined: 15 May 2016 16:34
- Location: High Wycombe
- Location: High Wycombe Area (Bucks)
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Tom,
I'd like the pair of footrests (the ones in the top photos 4,5, and 6) and undamaged brake lever (photos 1,2, &3) I hope I've already mentioned. Also I'd like the used gear lever please (in photos 10 & 11). And do you have a NOS gear lever too? if so, that might be useful too as a spare.
Thank you
Julian
I'd like the pair of footrests (the ones in the top photos 4,5, and 6) and undamaged brake lever (photos 1,2, &3) I hope I've already mentioned. Also I'd like the used gear lever please (in photos 10 & 11). And do you have a NOS gear lever too? if so, that might be useful too as a spare.
Thank you
Julian
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Hi Tom,
Would you have a kick start lever for a 501 Camel/excaliber, just snapped mine.....
Thanks, Brian
Would you have a kick start lever for a 501 Camel/excaliber, just snapped mine.....
Thanks, Brian
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
@ Julian, yes i have the NOS gear lever with shaft in the other add.
Last edited by Tom on 28 Nov 2021 10:46, edited 1 time in total.
-
- Posts: 483
- Joined: 15 May 2016 16:34
- Location: High Wycombe
- Location: High Wycombe Area (Bucks)
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Tom,
Those are the ones, thank you, together with the NOS gear lever. At some point we'll need to sort out the logistics of getting them to me, as I've mentioned they're not urgently needed. However, if there's an opportunity to price up the shipping costs that'd be great as I assume we'll still be in lockdown for a month or more.
BTW: Do you happen to have the plastic chain guard large flatish piece (32.02.09) I could do with one, mine's quite damaged. I'll try repairing it meanwhile, so again not urgent.
Ciao ciao
Julian
Those are the ones, thank you, together with the NOS gear lever. At some point we'll need to sort out the logistics of getting them to me, as I've mentioned they're not urgently needed. However, if there's an opportunity to price up the shipping costs that'd be great as I assume we'll still be in lockdown for a month or more.
BTW: Do you happen to have the plastic chain guard large flatish piece (32.02.09) I could do with one, mine's quite damaged. I'll try repairing it meanwhile, so again not urgent.
Ciao ciao
Julian
Re: Enduro parts: Kanguro X1 XE X2 Camel 500 & 501
Ciao Julian,
Allright, yes the NOS gear lever is also yours, and shipment to the UK will be 12 GBP.
Let me know if you want to do this now, or on a later occassion?
No i don't have any kanguro chain guard plastics left, since i sold the Ballanti Kanguro project along with most of the spares that i had last summer.
Ciao Bello
Allright, yes the NOS gear lever is also yours, and shipment to the UK will be 12 GBP.
Let me know if you want to do this now, or on a later occassion?
No i don't have any kanguro chain guard plastics left, since i sold the Ballanti Kanguro project along with most of the spares that i had last summer.
Ciao Bello