Moto Morini 3 1/2 Exhaust Ring Spanner.
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Kamel
Steve is going to post me a nut , so I will draw one up , could do with some pictures of the clearance as the 350 is quite tight.
Cheers
Stempy
Steve is going to post me a nut , so I will draw one up , could do with some pictures of the clearance as the 350 is quite tight.
Cheers
Stempy
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Hi Stempy, ok I'll see what I can do.
Cheers,
Kamel.
Cheers,
Kamel.
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Hi Stempy
I have pm’d you just now
Regards John
I have pm’d you just now
Regards John
-
- Posts: 2
- Joined: 12 Oct 2020 14:22
- Location: Cambridgeshire
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Hi Stempy could you e mail me please at brian.archer65@icloud.com I'm not sure if I'm using this format properly, cheers Brian (old biker)
-
- Posts: 1401
- Joined: 12 Nov 2007 23:44
- Location: Leicestershire
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Hi Rick and others, posted a couple of used exhaust nuts today. They weren't quite as virgin as I originally thought and there is some damage to a few of the castellations. I think they should still do to give you the dimensions though.
All donations to the rest home for old Camels, Leicestershire.
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Hi Stempy,
Here's a picture of one of my mangled nuts (queue the carry on jokes)..
The blue line is a maximum of 8mm I would say.
Hope that helps,
Kamel.
Here's a picture of one of my mangled nuts (queue the carry on jokes)..
The blue line is a maximum of 8mm I would say.
Hope that helps,
Kamel.
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Steve Brown wrote:Hi Rick and others, posted a couple of used exhaust nuts today. They weren't quite as virgin as I originally thought and there is some damage to a few of the castellations. I think they should still do to give you the dimensions though.
Steve nuts received, will have a drawing done as soon I have a bit of spare time
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Spanner back from the laser cutters ,will send back to Steve for approval
-
- Posts: 389
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: Moto Morini 3 1/2 Exhaust Ring Spanner.
Not wishing to detract from your sale, but for a small, lightweight, under-seat-toolkit roadside emergency spanner, the C-spanners with Koni and Hagon shocks fit Morini exhaust nuts, 350 and 500. I wouldnt want to give it loads of welly, but it'd get you home