Moto Morini 3 1/2 Exhaust Ring Spanner.

Morini related only please
Stempy
Posts: 135
Joined: 07 Jul 2020 08:23
Location: Grimsby

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Stempy »

Kamel

Steve is going to post me a nut , so I will draw one up , could do with some pictures of the clearance as the 350 is quite tight.

Cheers
Stempy
Kamel
Posts: 175
Joined: 10 Feb 2020 22:31
Location: Zurich, Switzerland

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Kamel »

Hi Stempy, ok I'll see what I can do.


Cheers,

Kamel.
3potjohn
Posts: 1243
Joined: 02 Jun 2007 13:58
Location: Devon

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by 3potjohn »

Hi Stempy
I have pm’d you just now
Regards John
oldbiker1948
Posts: 2
Joined: 12 Oct 2020 14:22
Location: Cambridgeshire

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by oldbiker1948 »

Hi Stempy could you e mail me please at brian.archer65@icloud.com I'm not sure if I'm using this format properly, cheers Brian (old biker)
Steve Brown
Posts: 1390
Joined: 12 Nov 2007 23:44
Location: Leicestershire

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Steve Brown »

Hi Rick and others, posted a couple of used exhaust nuts today. They weren't quite as virgin as I originally thought and there is some damage to a few of the castellations. I think they should still do to give you the dimensions though.
All donations to the rest home for old Camels, Leicestershire.
Kamel
Posts: 175
Joined: 10 Feb 2020 22:31
Location: Zurich, Switzerland

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Kamel »

Hi Stempy,
Here's a picture of one of my mangled nuts (queue the carry on jokes)..
Blue line = 8mm
Blue line = 8mm
Exhaust nut_1.JPG (94.72 KiB) Viewed 4287 times
The blue line is a maximum of 8mm I would say.

Hope that helps,

Kamel.
Stempy
Posts: 135
Joined: 07 Jul 2020 08:23
Location: Grimsby

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Stempy »

Steve Brown wrote:Hi Rick and others, posted a couple of used exhaust nuts today. They weren't quite as virgin as I originally thought and there is some damage to a few of the castellations. I think they should still do to give you the dimensions though.

Steve nuts received, will have a drawing done as soon I have a bit of spare time :D
Stempy
Posts: 135
Joined: 07 Jul 2020 08:23
Location: Grimsby

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by Stempy »

Spanner back from the laser cutters ,will send back to Steve for approval :D
IMG_9398.jpg
IMG_9398.jpg (44.2 KiB) Viewed 4103 times
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: Moto Morini 3 1/2 Exhaust Ring Spanner.

Post by simonnorthroad »

Not wishing to detract from your sale, but for a small, lightweight, under-seat-toolkit roadside emergency spanner, the C-spanners with Koni and Hagon shocks fit Morini exhaust nuts, 350 and 500. I wouldnt want to give it loads of welly, but it'd get you home
Post Reply