Camel Mk one parts wanted
Camel Mk one parts wanted
seat and side panels in any condition considered
see pic-this isn't mine....unfortunately
thanks
Van
Nottingham
see pic-this isn't mine....unfortunately
thanks
Van
Nottingham
Camel sidepanels and fork stanchions still needed
I managed to get a seat for my Camel-now I need the elusive sidepanels-someone must have some somewhere!
Anyone got any 38mm fork stanchions?
cheers
Van
Anyone got any 38mm fork stanchions?
cheers
Van
Hi,
Morini and KTM used almost the same Marzocchi forks. I have replaced mine with one. There are probably more KTM's around so maybe you should try that direction.
Two years ago I bought sidepanels (and a tank!) at Luzzi in Siena, don't know if he still has some.
I am still on the lookout for a centrestand so if you happen to stumble upon one...
Best,
Hans
Morini and KTM used almost the same Marzocchi forks. I have replaced mine with one. There are probably more KTM's around so maybe you should try that direction.
Two years ago I bought sidepanels (and a tank!) at Luzzi in Siena, don't know if he still has some.
I am still on the lookout for a centrestand so if you happen to stumble upon one...
Best,
Hans
-
- Posts: 42
- Joined: 06 May 2007 16:40
- Location: Napoli, Italy
i can give a ring to Mr luzzi from italy but i need some number to callhombre wrote:That's too bad. He doesn't have e-mail. If anyone has a fax near to use (unfortunately I don't have one either), I sent an Italian translation to Van to use. This might become an international effort this one!
cosworth
924T
Camel 501
924T
Camel 501
He is on this list.
http://www.micapeak.com/mc/addrs/amotomorini.html
Maybe there are a few others you can try too:
http://www.micapeak.com/mc/addrs/amotomorini.html
Maybe there are a few others you can try too:
-
- Posts: 42
- Joined: 06 May 2007 16:40
- Location: Napoli, Italy
Thanks in advance!hombre wrote:He is on this list.
http://www.micapeak.com/mc/addrs/amotomorini.html
Maybe there are a few others you can try too:
today in the morning i'll do a call and ask for sidepanels and seat!
i'll cross my fingers for you
cosworth
924T
Camel 501
924T
Camel 501
Camel Mk 1 parts wanted...
I can only assume they are no spare sidepanels left in the world! Or instrument housings....
Unless anyone knows better!
Unless anyone knows better!
I've got some side panels available. They're not quite the same as the original Mk1. They're from about 1983 and have integral number plates. The frame looks the same and it's twin shock, so I would think that the mounting points are the same.
Sorry, no instrument housing.
Let me know if you're interested
Sorry, no instrument housing.
Let me know if you're interested