350 PARTS WANTED
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
350 PARTS WANTED
To complete a project - 350 silencers, fork stanchion with good chrome, and (you can but ask) a 350 stainless front guard 1976-78 style)
Probably will have other Morini parts I can swap if you too are looking....
Probably will have other Morini parts I can swap if you too are looking....
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: 350 PARTS WANTED
cheers Tom. will ahve a look
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
Re: 350 PARTS WANTED
Try Disco Volante for forks. I bought a new pair for my Strada. Tomesselli make them, I believe.
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: 350 PARTS WANTED
Yes that would be my next port of call for new if no-one here took pity on me
Re: 350 PARTS WANTED
stanchions are available on http://www.tnk.it/en/prodotti7.php?mp=T ... &mm=MORINI
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: 350 PARTS WANTED
Thank you! Looks like no-one's offering me good used,
So far....
So far....
-
- Posts: 450
- Joined: 16 Jun 2007 09:43
- Location: Northampton
Re: 350 PARTS WANTED
Hi,
just be aware that the Tarozzi tubes may be an exact replacement, or, as I found out, they were to a slightly different design, needing spacers to be made for the dampers to work. Also the top nuts had a different thread - 1mm pitch instead of 1.5mm or something like that.
My originals were for a 1978 model. Have no idea whether the ones I got were for an earlier or later model though.
Regards,
George.
just be aware that the Tarozzi tubes may be an exact replacement, or, as I found out, they were to a slightly different design, needing spacers to be made for the dampers to work. Also the top nuts had a different thread - 1mm pitch instead of 1.5mm or something like that.
My originals were for a 1978 model. Have no idea whether the ones I got were for an earlier or later model though.
Regards,
George.
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: 350 PARTS WANTED
Hmmmn that's ominous George.
Ive just had a top yoke nut copied in stainless, ordered another for a spare set of yokes and discovered, at some point Marzocchi changed the thread pitch so the nut's no good...Grrrr
Are you the long standing MRC George, that used to sell parts BTW?
Ive just had a top yoke nut copied in stainless, ordered another for a spare set of yokes and discovered, at some point Marzocchi changed the thread pitch so the nut's no good...Grrrr
Are you the long standing MRC George, that used to sell parts BTW?
-
- Posts: 2415
- Joined: 22 Nov 2008 17:41
- Location: Even further oop North
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: 350 PARTS WANTED
Oooh cool