350 PARTS WANTED

350 PARTS WANTED

Postby simonnorthroad » 03 Nov 2017 10:12

To complete a project - 350 silencers, fork stanchion with good chrome, and (you can but ask) a 350 stainless front guard 1976-78 style)

Probably will have other Morini parts I can swap if you too are looking....
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57

Re: 350 PARTS WANTED

Postby Tom » 04 Nov 2017 11:54

There is a front mudquard in Germany:

https://www.ebay.de/itm/Moto-Morini-350 ... rmvSB=true

Tom
Tom
 
Posts: 250
Joined: 26 May 2010 21:07
Location: The Hague The Netherlands

Re: 350 PARTS WANTED

Postby simonnorthroad » 07 Nov 2017 09:57

cheers Tom. will ahve a look
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57

Re: 350 PARTS WANTED

Postby MickeyMoto » 07 Nov 2017 11:02

Try Disco Volante for forks. I bought a new pair for my Strada. Tomesselli make them, I believe.
MickeyMoto
 
Posts: 1241
Joined: 22 Nov 2008 17:41
Location: T'North

Re: 350 PARTS WANTED

Postby simonnorthroad » 07 Nov 2017 16:48

Yes that would be my next port of call for new if no-one here took pity on me
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57

Re: 350 PARTS WANTED

Postby hendre » 08 Nov 2017 07:02

hendre
 
Posts: 409
Joined: 11 Aug 2007 06:51
Location: The Netherlands

Re: 350 PARTS WANTED

Postby simonnorthroad » 15 Nov 2017 11:24

Thank you! Looks like no-one's offering me good used,
So far....
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57

Re: 350 PARTS WANTED

Postby George 350 » 17 Nov 2017 07:37

Hi,
just be aware that the Tarozzi tubes may be an exact replacement, or, as I found out, they were to a slightly different design, needing spacers to be made for the dampers to work. Also the top nuts had a different thread - 1mm pitch instead of 1.5mm or something like that.
My originals were for a 1978 model. Have no idea whether the ones I got were for an earlier or later model though.

Regards,
George.
George
350 sport 1978, 350 Strada 1978
George 350
 
Posts: 252
Joined: 16 Jun 2007 09:43
Location: Northampton

Re: 350 PARTS WANTED

Postby simonnorthroad » 17 Nov 2017 15:50

Hmmmn that's ominous George.
Ive just had a top yoke nut copied in stainless, ordered another for a spare set of yokes and discovered, at some point Marzocchi changed the thread pitch so the nut's no good...Grrrr
Are you the long standing MRC George, that used to sell parts BTW?
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57


Re: 350 PARTS WANTED

Postby simonnorthroad » 07 Dec 2017 19:34

Oooh cool
simonnorthroad
 
Posts: 72
Joined: 16 May 2017 10:57


Return to Bikes and bits wanted

Who is online

Users browsing this forum: No registered users and 8 guests