500 Rear caliper complete or just the 38mm pistons

500 Rear caliper complete or just the 38mm pistons

Postby jeanster » 09 Jan 2018 16:58

Need new or serviceable 38mm pistons or complete rear brake caliper for 500 Strada or info where else these can be sourced.
User avatar
jeanster
 
Posts: 25
Joined: 03 Oct 2006 11:49
Location: Bridge of Weir

Re: 500 Rear caliper complete or just the 38mm pistons

Postby pikl » 09 Jan 2018 18:14

These are probably hard to find. But they are relatively easy to make on any decent lathe, and that would likely be considerably cheaper.
pikl
 
Posts: 17
Joined: 14 Dec 2017 21:26

Re: 500 Rear caliper complete or just the 38mm pistons

Postby hendre » 10 Jan 2018 08:25

I have a few rear calipers lying around I think, I'll have a look in the garage tonight
hendre
 
Posts: 371
Joined: 11 Aug 2007 06:51
Location: The Netherlands

Re: 500 Rear caliper complete or just the 38mm pistons

Postby jeanster » 10 Jan 2018 12:10

Thanks. Seals seem to be readily available but not the pistons. I'd take either whole caliper or only pistons if you find either at whatever you consider a reasonable price.
User avatar
jeanster
 
Posts: 25
Joined: 03 Oct 2006 11:49
Location: Bridge of Weir

Re: 500 Rear caliper complete or just the 38mm pistons

Postby jeanster » 18 Jan 2018 13:41

Got what was required. Now have a rolling chassis with a rear brake. Onward and upwards.
User avatar
jeanster
 
Posts: 25
Joined: 03 Oct 2006 11:49
Location: Bridge of Weir

Re: 500 Rear caliper complete or just the 38mm pistons

Postby hendre » 22 Jan 2018 07:08

I totally lost track of your request untill last saturday (sorry for that). Guess I won't have to go into the garage to find one :wink:
hendre
 
Posts: 371
Joined: 11 Aug 2007 06:51
Location: The Netherlands

Re: 500 Rear caliper complete or just the 38mm pistons

Postby jeanster » 22 Jan 2018 10:11

Thanks anyway. It's the thought that counts.
User avatar
jeanster
 
Posts: 25
Joined: 03 Oct 2006 11:49
Location: Bridge of Weir

Re: 500 Rear caliper complete or just the 38mm pistons

Postby jeanster » 22 Jan 2018 10:11

Thanks anyway. It's the thought that counts.
User avatar
jeanster
 
Posts: 25
Joined: 03 Oct 2006 11:49
Location: Bridge of Weir


Return to Bikes and bits wanted

Who is online

Users browsing this forum: No registered users and 4 guests