Page 1 of 1

500 Rear caliper complete or just the 38mm pistons

Posted: 09 Jan 2018 16:58
by jeanster
Need new or serviceable 38mm pistons or complete rear brake caliper for 500 Strada or info where else these can be sourced.

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 09 Jan 2018 18:14
by pikl
These are probably hard to find. But they are relatively easy to make on any decent lathe, and that would likely be considerably cheaper.

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 10 Jan 2018 08:25
by hendre
I have a few rear calipers lying around I think, I'll have a look in the garage tonight

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 10 Jan 2018 12:10
by jeanster
Thanks. Seals seem to be readily available but not the pistons. I'd take either whole caliper or only pistons if you find either at whatever you consider a reasonable price.

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 18 Jan 2018 13:41
by jeanster
Got what was required. Now have a rolling chassis with a rear brake. Onward and upwards.

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 22 Jan 2018 07:08
by hendre
I totally lost track of your request untill last saturday (sorry for that). Guess I won't have to go into the garage to find one :wink:

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 22 Jan 2018 10:11
by jeanster
Thanks anyway. It's the thought that counts.

Re: 500 Rear caliper complete or just the 38mm pistons

Posted: 22 Jan 2018 10:11
by jeanster
Thanks anyway. It's the thought that counts.