3 1/2 Exhaust nut spanner wanted

mbmm350s
Posts: 666
Joined: 22 Jun 2018 10:18
Location: Reading UK
Location: Berkshire UK

Re: 3 1/2 Exhaust nut spanner wanted

Post by mbmm350s »

Hi

Also for the nuts

https://motostoricheitaliane.com/negozi ... orini-350/

The quality is very good.

Mark
buell1203
Posts: 178
Joined: 12 Feb 2011 18:22
Location: uk

Re: 3 1/2 Exhaust nut spanner wanted

Post by buell1203 »

Dunno about others but I found the Nlm spanner to be crap. Bends easily.Not worth th bother.
I have it should anyone need one.
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 3 1/2 Exhaust nut spanner wanted

Post by simonnorthroad »

Koni shocks C spanner fits Morini exhaust nuts. Better than North Leicester tinfoil tool but still not the most sturdy.

Ive often found useful C-spanners in the rusty-tools-50p-box at car boot sales
Mepstein
Posts: 147
Joined: 27 Apr 2016 02:38
Location: Newark, Delaware
Location: Newark, Delaware, USA

Re: 3 1/2 Exhaust nut spanner wanted

Post by Mepstein »

I removed my exhaust nuts that had been on the bike for at least 30 years by heating the area around them with a torch and then it took very little effort to remove them. Probably why it's suggested to tighten them once the engine is hot. We work on a lot of air cooled Porsche engines at the shop and always heat the aluminum or magnesium case around the stud before removal. It seems to be much kinder to the threads than removing by brute force.
Post Reply