Anyone have one I can buy?
Text me 07788 442155 or email: moriniboy23@yahoo.co.uk
Its the finishing touch for a 1974 Sport restoration
Stainless rear Morini mudguard wanted
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
-
- Posts: 450
- Joined: 16 Jun 2007 09:43
- Location: Northampton
Re: Stainless rear Morini mudguard wanted
If George Lane or Tom in Holland can't help, nor Mdina, then there are some on ebay (.de and.it) but they aren't cheap anymore, especially with postage.
For how much anyone would notice, a Norton Commando rear mudguard is around £80 new from RGM, and for the bit you can see is virtually identical. Both (1978) Morini 350 and Commando 'guards are 130mm wide. If you want to pursue this route, I can have a closer check tomorrow as my Dommi has Commando mudguards on it.
Regards, George.
For how much anyone would notice, a Norton Commando rear mudguard is around £80 new from RGM, and for the bit you can see is virtually identical. Both (1978) Morini 350 and Commando 'guards are 130mm wide. If you want to pursue this route, I can have a closer check tomorrow as my Dommi has Commando mudguards on it.
Regards, George.
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
Re: Stainless rear Morini mudguard wanted
I have a steel one which you can paint silver
Simon asked me before, i would really love to help him out, but i am not plenty in my rear INOX fenders as well.
Just enough to cover for my upcomming projects.
If i bumb into one, i will ofcourse buy it and sell it double to Simon
Indeed, there are really nice stainless steel fenders on the market nowadays. They have the correct sizes and only need some correct drillings.
That would be my plan, if it was my situation.
But i will keep an eye out for you Simon
Simon asked me before, i would really love to help him out, but i am not plenty in my rear INOX fenders as well.
Just enough to cover for my upcomming projects.
If i bumb into one, i will ofcourse buy it and sell it double to Simon
Indeed, there are really nice stainless steel fenders on the market nowadays. They have the correct sizes and only need some correct drillings.
That would be my plan, if it was my situation.
But i will keep an eye out for you Simon
-
- Posts: 388
- Joined: 16 May 2017 10:57
- Location: Bath, UK
Re: Stainless rear Morini mudguard wanted
Thank you guys.
Yes please George, get yr tape out thanks...
I did use a Commando guard on my 500 and it was good but lacked the 'crease' for clearance for the chain run which a better metal-worker than myself could no doubt address with a former
Yes please George, get yr tape out thanks...
I did use a Commando guard on my 500 and it was good but lacked the 'crease' for clearance for the chain run which a better metal-worker than myself could no doubt address with a former
-
- Posts: 292
- Joined: 07 Apr 2014 16:06
- Location: west midlands
Re: Stainless rear Morini mudguard wanted
Dear Mr NorthRoad,
For your information, I have two of what you want, one attached to a motorcycle and the other paired with a front one. The one on it's own would be more than the paired.
Let me know if you are interested, privately.
For your information, I have two of what you want, one attached to a motorcycle and the other paired with a front one. The one on it's own would be more than the paired.
Let me know if you are interested, privately.