going nuts

Maestro, SEI-V
Post Reply
User avatar
hombre
Posts: 625
Joined: 09 Apr 2006 16:15
Location: Amsterdam/Alessandria
Contact:

going nuts

Post by hombre »

Hello All,
I am in need of some advice here. The nut that holds the gear for the oil pump according to the book needs a tourque setting of approx 5 mkgs. Btut I saw in a 501 handbook 11 mkgs. Which one is right? I hope 5... :roll:
3potjohn
Posts: 1243
Joined: 02 Jun 2007 13:58
Location: Devon

Post by 3potjohn »

I hope it's 5 as well, 11 is around 108 Nm in real units and for a nut of that size its pretty tight. I do not have any info on this though I recently must have tightened mine up, cannot recall what I did.
Post Reply