MRC Forum- brought to you by www.morini-riders-club.com

Hello All,
I am in need of some advice here. The nut that holds the gear for the oil pump according to the book needs a tourque setting of approx 5 mkgs. Btut I saw in a 501 handbook 11 mkgs. Which one is right? I hope 5...

I hope it's 5 as well, 11 is around 108 Nm in real units and for a nut of that size its pretty tight. I do not have any info on this though I recently must have tightened mine up, cannot recall what I did.