Spewing oil.

Maestro, SEI-V
Clive
Posts: 53
Joined: 14 Nov 2014 15:00
Location: Dewsbury Yorkshire
Location: West Yorkshire

Re: Spewing oil.

Post by Clive »

Sorry norbert I can't quite understand what you are asking.
norbert
Posts: 752
Joined: 15 May 2007 15:15
Location: Lübeck/Germany

Re: Spewing oil.

Post by norbert »

I was talking about the tube behind the rear cilinder where the motor breeze. This tube , recording to the mosel, ends under the deat or in a black box box together with the tubes from the rocker covers. If the clamp is in bad condicion and the tube a very old and hard one ...
Clive
Posts: 53
Joined: 14 Nov 2014 15:00
Location: Dewsbury Yorkshire
Location: West Yorkshire

Re: Spewing oil.

Post by Clive »

Hi norbert.
I understand now. I have checked that and all seems ok. Thanks anyway.
Clive
Clive
Posts: 53
Joined: 14 Nov 2014 15:00
Location: Dewsbury Yorkshire
Location: West Yorkshire

Re: Spewing oil.

Post by Clive »

Cured her.
Took off cleaned and inspected for damage all pipe work associated with the collector/separator box thing along with the box itself and reassembled with new clips, 2 new O rings on dipstick and Bobs' your uncle, or should that be Roberto's tuo zio
Post Reply