Please can anyone confirm if the 350 rotors are the same as the 500 rotors ?
Cheers
Stemp
Rotor
-
- Posts: 292
- Joined: 07 Apr 2014 16:06
- Location: west midlands
Re: Rotor
Yes you can. The generator output won't be as high as the 500 160w to 90w unless it is off a K2 140w. Regarding the ignition timing, then simply mark the 500 firing point on the flywheel. If you know the degrees you want, then it will be easier to use radians from the TDC mark, just pinch the missus' tape measure from her sewing basket as it follows the curvature more closely rather than trying to use a protractor.