Replacement Side Panel Rubber Pins

User avatar
Chips1953
Posts: 408
Joined: 02 Dec 2011 14:05
Location: Carlilse

Re: Replacement Side Panel Rubber Pins

Post by Chips1953 »

Hi Chris
I'm looking for 4 of the rubber side panel grommets, I've tried to get them from the website, but it's only allowing me to buy 2 at a time.
Shall I pay you direct?

Thanks George
Singer 185K
Wheel Horse commando 7
Honda SS90 1965
User avatar
corsaro chris
Posts: 1162
Joined: 13 Jul 2006 21:28
Location: Berks, UK

Re: Replacement Side Panel Rubber Pins

Post by corsaro chris »

George;

OK - send a cheque for £7:90 (I think...) and once I have it they'll be in the post. We're getting a little short of these now...

Best wishes,

CC
"I'll use the Morini"
Bison
Posts: 132
Joined: 27 Mar 2013 10:49
Location: West Lothian

Re: Replacement Side Panel Rubber Pins

Post by Bison »

Chris,
Do you still have the rubbers?, I would need 4 if possible. Where do I send payment to?.
Thanks,
Alan.
User avatar
corsaro chris
Posts: 1162
Joined: 13 Jul 2006 21:28
Location: Berks, UK

Re: Replacement Side Panel Rubber Pins

Post by corsaro chris »

Alan;

On line under the Products section of the MRC web site;

http://www.morini-riders-club.com/products.html

There are a few left, but we'll either need to get more or withdraw them from sale soon as I've almost run out of the second batch!

Good riding,

CC
"I'll use the Morini"
User avatar
corsaro chris
Posts: 1162
Joined: 13 Jul 2006 21:28
Location: Berks, UK

Re: Replacement Side Panel Rubber Pins

Post by corsaro chris »

We've now ordered a third set of the rubber side panel pins; these won't be with us until after Christmas, and so it's best to check with me before ordering to ensure that I have enough in stock. When we run out I'll be e-mailing any-one ordering them to advise of an anticipated delivery date. And don't worry, Tim, your two pins are in the post!

Good riding / rebuilding

CC
"I'll use the Morini"
Db7gtgrigio
Posts: 80
Joined: 16 Dec 2015 09:01
Location: Sydney, Australia

Re: Replacement Side Panel Rubber Pins

Post by Db7gtgrigio »

Is it possible for us poor cousins down under to buy a set of these pins???? I'm not a member as its a bit hard to justify from half way round the world.....
User avatar
corsaro chris
Posts: 1162
Joined: 13 Jul 2006 21:28
Location: Berks, UK

Re: Replacement Side Panel Rubber Pins

Post by corsaro chris »

Hi Chris;

Of course - just go to the Products pages of the MRC web site and make your choice!

While there, browse the membership options and you will come across 'Rest of the World' virtual membership. You save 50% of membership cost of the best English Language Morini Club (wouldn't want to upset any of our European colleagues now, would we...) by getting the excellent copies of ATG electronically, so you can buy your second Sport or whatever ahead of the masses, hear about what's going on at the Factory, and lots of other quality news...

You just know it makes sense, and it helps pay for the (free to use) Forum :D

Good riding,

CC
"I'll use the Morini"
Steve48
Posts: 9
Joined: 28 Sep 2019 16:19
Location: Puysserampion France

Re: Replacement Side Panel Rubber Pins

Post by Steve48 »

Hi
Are there any left please and if so how much to post to France.
Thanks Steve
User avatar
buzby
Posts: 190
Joined: 14 Apr 2006 18:31
Location: southampton

Re: Replacement Side Panel Rubber Pins

Post by buzby »

I need some of these as well. The ones sold by Mdina Italia are much too big.
David
75 350 Strada, 76 350 Strada, 76 350 Sport. 80 250 vee, 72 Triumph TR5T and 81 Honda CB250RS
acemorini
Posts: 315
Joined: 11 Sep 2012 13:49
Location: buxted east sussex
Location: Uckfield, East Sussex.
Contact:

Re: Replacement Side Panel Rubber Pins

Post by acemorini »

I could do with four myself, any in stock ?
Regards Pete.
MickeyMoto
Posts: 2415
Joined: 22 Nov 2008 17:41
Location: Even further oop North

Re: Replacement Side Panel Rubber Pins

Post by MickeyMoto »

Use the Products section of the website!
User avatar
corsaro chris
Posts: 1162
Joined: 13 Jul 2006 21:28
Location: Berks, UK

Re: Replacement Side Panel Rubber Pins

Post by corsaro chris »

Hi all;

We have a good supply of these pins in stock now; the latest are 3D printed but none the worse for it. A choice of 2 or 4 pins; it makes sense to buy two pairs (i.e., 4) as it's the same postage but cheaper!

Good riding / restoring...

CC
"I'll use the Morini"
ivanca
Posts: 23
Joined: 27 Jul 2019 18:34
Location: York

Re: Replacement Side Panel Rubber Pins

Post by ivanca »

Hi, looking to buy a set of 4 of the side panel rubber pins but will only let me by in sets of 2. Can you help ? Sorry may be me that's missed something. Thanks
User avatar
Ming
Posts: 798
Joined: 01 Aug 2014 16:32
Location: France
Location: Central France

Re: Replacement Side Panel Rubber Pins

Post by Ming »

Buy two sets? (1 set = 2 rubbers = 1 side - I think).
User avatar
Daddy Dom
Posts: 512
Joined: 16 Nov 2006 19:48
Location: Auckland, New Zealand

Re: Replacement Side Panel Rubber Pins

Post by Daddy Dom »

Ming wrote:Buy two sets? (1 set = 2 rubbers = 1 side - I think).
Yes Ming, I just did this, it worked.

(I hope they weren't the last two ... four ... )
MRC 3082½
Post Reply