350 PARTS WANTED

Post Reply
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

350 PARTS WANTED

Post by simonnorthroad »

To complete a project - 350 silencers, fork stanchion with good chrome, and (you can but ask) a 350 stainless front guard 1976-78 style)

Probably will have other Morini parts I can swap if you too are looking....
Tom
Posts: 424
Joined: 26 May 2010 21:07
Location: The Hague The Netherlands

Re: 350 PARTS WANTED

Post by Tom »

There is a front mudquard in Germany:

https://www.ebay.de/itm/Moto-Morini-350 ... rmvSB=true

Tom
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 350 PARTS WANTED

Post by simonnorthroad »

cheers Tom. will ahve a look
MickeyMoto
Posts: 2415
Joined: 22 Nov 2008 17:41
Location: Even further oop North

Re: 350 PARTS WANTED

Post by MickeyMoto »

Try Disco Volante for forks. I bought a new pair for my Strada. Tomesselli make them, I believe.
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 350 PARTS WANTED

Post by simonnorthroad »

Yes that would be my next port of call for new if no-one here took pity on me
hendre
Posts: 600
Joined: 11 Aug 2007 06:51
Location: The Netherlands

Re: 350 PARTS WANTED

Post by hendre »

simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 350 PARTS WANTED

Post by simonnorthroad »

Thank you! Looks like no-one's offering me good used,
So far....
George 350
Posts: 450
Joined: 16 Jun 2007 09:43
Location: Northampton

Re: 350 PARTS WANTED

Post by George 350 »

Hi,
just be aware that the Tarozzi tubes may be an exact replacement, or, as I found out, they were to a slightly different design, needing spacers to be made for the dampers to work. Also the top nuts had a different thread - 1mm pitch instead of 1.5mm or something like that.
My originals were for a 1978 model. Have no idea whether the ones I got were for an earlier or later model though.

Regards,
George.
George
350 sport 1978, 350 Strada 1978
650 Norton 1967, 650 Kawasaki 1977 and 650 Enfield 2019
simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 350 PARTS WANTED

Post by simonnorthroad »

Hmmmn that's ominous George.
Ive just had a top yoke nut copied in stainless, ordered another for a spare set of yokes and discovered, at some point Marzocchi changed the thread pitch so the nut's no good...Grrrr
Are you the long standing MRC George, that used to sell parts BTW?
MickeyMoto
Posts: 2415
Joined: 22 Nov 2008 17:41
Location: Even further oop North

Re: 350 PARTS WANTED

Post by MickeyMoto »

simonnorthroad
Posts: 388
Joined: 16 May 2017 10:57
Location: Bath, UK

Re: 350 PARTS WANTED

Post by simonnorthroad »

Oooh cool
Post Reply