MRC Forum- brought to you by www.morini-riders-club.com

Just got home after a trip to town on the Kanguro & noticed my rear light lens is missing, as is the bulb holder. I guess they vibrated free...

Whilst I can probably cobble something together for the bulb holder I still could do with the lens if anyone has one spare?

Your silencer is rough too? Mine is shot! Been wondering what to replace it with?

Do you mean this one?

http://www.ebay.de/itm/Auspuff-Krummer- ... 541b91e0de

Should be ok to block the link pipe hole & cut the header to the length needed. Can't see why it shouldn't work

On the X1 the rear header runs tight around the back of the barrel and sweeps back across to the right side, where it joins the silencer along with the front header, whereas the X3 rear header just drops down & then roughly follows the frame but stays on the left side. Also the X3 link pipe woul...

Many thanks for the link. Its saved me quite a few quid buying the manual. The torque settings are indeed in the blue book. I would also be interested in knowing what the usual oil pressure is. It seems a good idea to check it while the engine is still running, before stripping the top end, as it mi...

I think the oil control rings on my 350 sport engine may be suffering the same fate as the front pot is smoking & there is an oily residue on that silencer. The rear pot seems fine though. I will have investigate asap. Does anybody know the correct torque for the head bolts for when I come to re...

Make sure the crankcase breather pipe is correctly positioned so that water thrown from the rear tyre cannot enter into it.

Just an update to tell anyone thats interested that 44 teeth is indeed the minimum.

Can anyone tell me if its possible to fit anything smaller than a 44 tooth rear sprocket (6 bolt type) to a Kanguro with drum rear brake? NLM seem to think that anything smaller will end up running on the drum. Cheers, Mark

I need a disc type front wheel, speedo, headlight, fairing & monoshock for a Kanguro if anybody can help? Any year will do. Also a 44 tooth or near rear sprocket, must be 6 bolt type for drum brake. Cheers, Mark.

Hi Buzby,
i've just PM'd you about the bike but am having a few issues with the website so please let me know if you receive it or not. Cheers, Mark