Do you run with it on all the time?
Search found 2435 matches
- 08 Apr 2024 11:53
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2402
- 07 Apr 2024 19:15
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2402
Re: Lighting circuit problem
Luckily I did not post in Scotland so no hate crime against Morinis has been committed!
- 07 Apr 2024 18:13
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2402
Re: Lighting circuit problem
What is the wattage of the headlight? The alternator chucks out about 140W at high revs. Brake light and two indicators are +/- 60 Watts. Add in your headlight and tail light and what is left has to charge the battery. Run at slower speeds, the output drops. My BMW has a voltage of 14volts with no l...
- 04 Apr 2024 19:19
- Forum: The 500
- Topic: Kick starting technique
- Replies: 7
- Views: 658
Re: Kick starting technique
The technique:
Ignition on
Fuel on
Chokes up and
Press button. Electric kick-start is best.
Ignition on
Fuel on
Chokes up and
Press button. Electric kick-start is best.
- 27 Mar 2024 09:27
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2402
Re: Lighting circuit problem
Perfect.
How satisfying finding a fault that only cost time!
How satisfying finding a fault that only cost time!
- 18 Mar 2024 07:20
- Forum: Tre e mezzo
- Topic: Lighting circuit problem
- Replies: 16
- Views: 2402
Re: Lighting circuit problem
If you read the blue book there is a section on fault finding the charging circuit. I would say that 12.5 volts across the battery at 5k rpm is a bit low. Your regulator may be faulty.
You may want to check the earthing points, too.
You may want to check the earthing points, too.
- 17 Mar 2024 16:37
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2578
Re: Best 31/2 cam for all-round flexibility?
Thank you, Norbert.
- 17 Mar 2024 09:07
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2578
Re: Best 31/2 cam for all-round flexibility?
This is good info.
A Sport piston with a Strada cam is a good option.
I know the 501 nikisil barrels do not fit an500 crankcase, but do the 350 nikisil barrels fit an earlier 350 crankcase?
A Sport piston with a Strada cam is a good option.
I know the 501 nikisil barrels do not fit an500 crankcase, but do the 350 nikisil barrels fit an earlier 350 crankcase?
- 03 Mar 2024 10:31
- Forum: Tre e mezzo
- Topic: Best 31/2 cam for all-round flexibility?
- Replies: 19
- Views: 2578
Re: Best 31/2 cam for all-round flexibility?
Sport cam was used from the first sports up until the later K series bikes where they moved to the M cam. There should be an S Stamped in the cam between the middle lobes, not so helpful if the engine is together, but easy to check what cam you have by measuring with a timing disc. None of the Mori...
- 29 Feb 2024 18:58
- Forum: Tre e mezzo
- Topic: Reinstating the electric starter part 2
- Replies: 9
- Views: 1185
Re: Reinstating the electric starter part 2
I would not think Morini could afford a different casing.
Has the linkage been changed, do you have rear sets?
Of course, I could be wrong, not unknown!
Has the linkage been changed, do you have rear sets?
Of course, I could be wrong, not unknown!
- 24 Feb 2024 08:43
- Forum: Tre e mezzo
- Topic: Engine woodruff Keys puzzler
- Replies: 3
- Views: 947
Re: Primary Drive woodruff Key puzzler
I think I have a spare key, if needed.
- 22 Feb 2024 08:32
- Forum: Singles
- Topic: 250 anybody?
- Replies: 3
- Views: 843
Re: 250 anybody?
This one is a bit sad. The provenance is rather lacking. I could understand if it were the bike that came second in the World Championships.
- 17 Feb 2024 11:35
- Forum: Tre e mezzo
- Topic: Bottom end strip
- Replies: 4
- Views: 1101
Re: Bottom end strip
Hi, 1. The nuts should be recessed in nut shaped holes. 2. You will probably need to drill out the crankshaft bolts if they do not yield. No idea from where they can be obtained. Re use the old ones if not damaged. 3. Use the special tools, the nut is ft (fantastically tight!). Butchering a socket w...
- 16 Feb 2024 08:56
- Forum: Tre e mezzo
- Topic: Oil pump seal variation in sizes/mdina part different?
- Replies: 4
- Views: 1102
Re: Oil pump seal variation in sizes/mdina part different?
I have used the black one but I prefer the old green one. Check the green one carefully, obviously not worth the risk if it is worn.
- 13 Feb 2024 12:52
- Forum: Singles
- Topic: 250 anybody?
- Replies: 3
- Views: 843
250 anybody?
Does this increase the value of my Morini? A 250 single going for a ridiculous price, whatever next?
https://www.motorcyclenews.com/news/202 ... n-results/
https://www.motorcyclenews.com/news/202 ... n-results/