Hallo everyone!
The chain on my Dart Is a bit rusty, more than 20 years of non working produced a lot of rust
I Will change for a new One
Please can you all confirm it Is a 520 type chain?
Or something different?
Please let me know
Thanks
Dart chain type
-
elektrobank
- Posts: 64
- Joined: 06 May 2007 16:40
- Location: Napoli, Italy
Dart chain type
cosworth
924T
Camel 501
924T
Camel 501
-
morini_tom
- Posts: 1109
- Joined: 05 May 2006 13:47
- Location: Northampton
- Location: Northampton
Re: Dart chain type
Yes, it’s a 520 chain.
I think 114 links but don’t quote me on that!
Recently I’ve been using DID 520 ERVT chains which are narrow x ring chains and have a pretty high tensile strength.
Assuming you are replacing the sprockets too, make sure you buy a 520 front sprocket as both 520 and 530 sizes are available for morini 350s. Mdina italia do stock them:
https://www.mdinaitalia.co.uk/morini-35 ... t-520.html
I think 114 links but don’t quote me on that!
Recently I’ve been using DID 520 ERVT chains which are narrow x ring chains and have a pretty high tensile strength.
Assuming you are replacing the sprockets too, make sure you buy a 520 front sprocket as both 520 and 530 sizes are available for morini 350s. Mdina italia do stock them:
https://www.mdinaitalia.co.uk/morini-35 ... t-520.html
-
elektrobank
- Posts: 64
- Joined: 06 May 2007 16:40
- Location: Napoli, Italy
Re: Dart chain type
Thanks for the reply tom!
I'll buy only the chain because the originale One Is a Little rusty, the bike has only 3000km so sprockets Will be almost new i think
I Will change also both the chain sliders, here in Italy are selling some good quality remanifactured parts only for 30 euros
I'll buy only the chain because the originale One Is a Little rusty, the bike has only 3000km so sprockets Will be almost new i think
I Will change also both the chain sliders, here in Italy are selling some good quality remanifactured parts only for 30 euros
cosworth
924T
Camel 501
924T
Camel 501