New Upgrade Day

Anything to do with the 1200 GranPasso series
Post Reply
HTS8888
Posts: 16
Joined: 23 Nov 2022 20:36
Location: Stoke on Trent

New Upgrade Day

Post by HTS8888 »

Looking forward to this upgrade....
Attachments
IMG_2471-1.jpg
IMG_2471-1.jpg (164.99 KiB) Viewed 3086 times
Painter
Posts: 123
Joined: 12 Nov 2015 20:57
Location: Birkenhead uk

Re: New Upgrade Day

Post by Painter »

Looking good, I dropped my forks off last week with Teut.
A worthwhile investment, I was not aware that only one leg operates as a dampener
HTS8888
Posts: 16
Joined: 23 Nov 2022 20:36
Location: Stoke on Trent

Re: New Upgrade Day

Post by HTS8888 »

Hi Steve

Yes Tuet mentioned you had, so the bike is now sharper due to being a bit lower, also sorted my rear Ohlins out as well, top guy highly recommended, I also swung round to the MTC guys in Ormskirk to look at the exhaust decat after bumping in to them at the classic bike show in Staffs
Painter
Posts: 123
Joined: 12 Nov 2015 20:57
Location: Birkenhead uk

Re: New Upgrade Day

Post by Painter »

just fitted the upgrade, also took the opportunity to make up a fender extender, stops the rad from getting blocked with crud, not ridden the bike yet.
Attachments
A2820946-1629-430A-8263-5DC3E611BBCB.jpg
A2820946-1629-430A-8263-5DC3E611BBCB.jpg (450.58 KiB) Viewed 2959 times
Painter
Posts: 123
Joined: 12 Nov 2015 20:57
Location: Birkenhead uk

Re: New Upgrade Day

Post by Painter »

Hi stu
Just saw your post, that’s great I look forward to seeing /experiencing the difference, the MTC lads are really fantastic as is TW.
One you have had your cat removed, get it richened up at the bottom end by motohub, another great outfit.
HTS8888
Posts: 16
Joined: 23 Nov 2022 20:36
Location: Stoke on Trent

Re: New Upgrade Day

Post by HTS8888 »

Hi Steve - yes Motohub round the corner from me, I am there tomorrow as my clutch is slipping under load so they are taking a look for me, will also discuss mapping etc, look forward to feed back on your upgrade :)
Post Reply