MRC Forum- brought to you by www.morini-riders-club.com

Benelli clutch Holding Tool- fits Wet clutch models

as the benelli clutch is the same this will fit the morini 1200's, unless it has been changed for later models

http://www.ebay.co.uk/itm/Benelli-clutc ... 19d5b7365d

£18 incl postage on ebay

Thx, excellent find. A bit late for me, unfortunately
Have just completed rebuilding my engine after exhaust valve broke - have blocked my clutch using bicycle brake cable....
Had to wait months for the new seals - had to be delivered by Morini to the dutch dealer, they took there time

Some pics:






Tool to remove flywheel


and running again

twisty wrote:Benelli clutch Holding Tool- fits Wet clutch models

as the benelli clutch is the same this will fit the morini 1200's, unless it has been changed for later models

http://www.ebay.co.uk/itm/Benelli-clutc ... 19d5b7365d

£18 incl postage on ebay

benelli clutch tool.jpg

hi twisty,
have you already used this tool? does it fit?

günni

the morini clutch is the same part as the benelli 1130 (wet clutch) , i've had them in my hand to check.

The only thing wrong with the clutch holding tool is it requires the clutch plates to be removed so that the splines on the tool fit the grooves on the clutch.

Otherwise a cheap investment.