Page 1 of 1
Rear Brake switch
Posted: 16 Oct 2011 22:45
by unreal
Hi all, as the Strada progresses I have just fitted the Valentini 2-1 pipe, what a sod! They are very tight and I ended up making spacers etc. Anyway, it looks like the rear brake light switch will no longer fit as the pipes too close. Does any one know if there's a rear brake cable with an inline brake switch, or who might make one up? Also is a rear light switch a legal requirement if there's a front switch?
Simon
Re: Rear Brake switch
Posted: 17 Oct 2011 05:34
by chirpy999
Yes , you can get one from one Nlm , they are about £25.00
Re: Rear Brake switch
Posted: 17 Oct 2011 06:41
by unreal
Cheers, I couldn't see it on their parts list, I'll give Rob a call tomorrow.
Simon
Re: Rear Brake switch
Posted: 17 Oct 2011 15:05
by morini500dave
Hi,only one brake light switch is needed on front or rear on bikes up to April 1986
Dave.
Re: Rear Brake switch
Posted: 21 Oct 2011 06:53
by 72degrees
I had the same problem on the 2C/375 with a 2:1 system. No brake cable with a switch available for a 250. I managed to rig up a generic pull switch mounted on a clamp on the frame and with a bit of twisted wire joining the return spring to the brake pedal. Crude but effective.