NOS 350 501 Enduro parts
Posted: 13 Mar 2020 16:44
I have some NOS Moto Morini stuff from a former Spanish dealer P.V.P. Unfortunately not everything is complete, or a set:
Engine mounting plate's, mounted on almost all Morini models from the 80's: for all Enduro models, but also 500 road bike and 350 'kinky frame' up to K2. NOS but a little bit shop spoiled 20 Euro's
Chain quard plastic parts 350/ 501 square frame Enduro, 6 Euro's for two (a set)
Rear cilinder exhaust down pipe, both 350 Kanguro (thinner) and 501 Camel (thicker). These are NOS! 60 Euro's
More then one heat shield NOS for front exhaust pipe Kanguro/ Camel/ Coguaro square frame, also Excalibur/ New York: 20 Euro's
Gear shift pedal and shaft Kanguro/ Camel, without the foot and the spring: SOLD
Battery tray and regulator holder, enduro square frame: 10 Euro's a piece. 15 euro's for both.
NOS 40 mm Marzocchi top fork stanchions nuts, for Enduro forks 501 Camel/ Coquaro: 50 Euro's for a set of two nuts.
tomros@live.nl
the Netherlands
Engine mounting plate's, mounted on almost all Morini models from the 80's: for all Enduro models, but also 500 road bike and 350 'kinky frame' up to K2. NOS but a little bit shop spoiled 20 Euro's
Chain quard plastic parts 350/ 501 square frame Enduro, 6 Euro's for two (a set)
Rear cilinder exhaust down pipe, both 350 Kanguro (thinner) and 501 Camel (thicker). These are NOS! 60 Euro's
More then one heat shield NOS for front exhaust pipe Kanguro/ Camel/ Coguaro square frame, also Excalibur/ New York: 20 Euro's
Gear shift pedal and shaft Kanguro/ Camel, without the foot and the spring: SOLD
Battery tray and regulator holder, enduro square frame: 10 Euro's a piece. 15 euro's for both.
NOS 40 mm Marzocchi top fork stanchions nuts, for Enduro forks 501 Camel/ Coquaro: 50 Euro's for a set of two nuts.
tomros@live.nl
the Netherlands