MRC Forum- brought to you by www.morini-riders-club.com

Things in shed#1 that I'd forgotten I put in there years ago.

Corsaro 1200 'nose fairing' with Palmer adjustable screen. I fitted it for a continental run, but reverted to the standard one when I sold the bike.

Two pairs of 350 Marzocchi rear shocks. They will need refurbishing. I doubt I will have a standard Morini again, but somebody might be able to make use of them.

A pair of original alloy carb to head intake elbows.

A couple of 350 heads. One has a good exhaust port and no seat to seat crack but is missing a valve guide. The other has virtually non existent port threads and a stuck in intake stub (for rubber elbow).

If anyone is interested I will put up photos.

Also a working 350 Speedo - but Kph (200) - best keep that or you can be sure the one on the 2C/375 will fail the next time I ride it

I would like 1 pair of shocks please (and I can collect). Price?

Photo of the two pairs (there is a third somewhere I think). The one pair (from the Spanish Strada) have different load adjustment rings. May not even by genuine Marzocchis? I have no idea what sort of price such items command these days. <Googles> Crikey!

Not chromes springs though so, I dunno, £30 (a pair)? Pick up OK.

£30 sounds fair to me. If there is a choice I would prefer the pair you consider to be most likely genuine Marzocchi. Let me know a suitable time to collect (I can make almost anytime) and I'll bring the cash. Dave.

davel182 wrote:£30 sounds fair to me. If there is a choice I would prefer the pair you consider to be most likely genuine Marzocchi. Let me know a suitable time to collect (I can make almost anytime) and I'll bring the cash. Dave.

The pair with black springs have yellow Marzocchi decals - I should have shown that!

I'm around tomorrow, and tomorrow and .... Particularly tomorrow, as someone is calling in on a work trip to pick up the Gilera GFR I'm selling.

the pair of original alloy carb to head intake elbows, how much with postage to the netherlands?

hendre wrote:the pair of original alloy carb to head intake elbows, how much with postage to the netherlands?

Hang on a bit as they may have 'issues' . I will dig them out and post photos.

72degrees wrote:

hendre wrote:the pair of original alloy carb to head intake elbows, how much with postage to the netherlands?

Hang on a bit as they may have 'issues' . I will dig them out and post photos.

Ah, yes - one is missing the locking ring. Still interested?

I've stuck the Corsaro nose fairing and Palmer Screen on Ebay.

Photo, if you want to snap it up.

If Hendre decides he does not want the carb inlet elbows without one of the locking rings then I would be interested.

72degrees wrote:

72degrees wrote:

hendre wrote:the pair of original alloy carb to head intake elbows, how much with postage to the netherlands?

Hang on a bit as they may have 'issues' . I will dig them out and post photos.

Ah, yes - one is missing the locking ring. Still interested?

Still interested, I have one that was overtightened and one of the three lugs connecting the two bits broke out. Please send me the detail by PM, postage to the Netherlands

Will PM you.

... I don’t suppose you have any front disk callipers hiding in the shed with the other bits? I seem to have bought a Frankenbike... my last discovery is having one old, one new style calliper on the two front disks, and it’s doing my OCD no good at all!

No, sorry.

Marco1964 wrote:... I don’t suppose you have any front disk callipers hiding in the shed with the other bits? I seem to have bought a Frankenbike... my last discovery is having one old, one new style calliper on the two front disks, and it’s doing my OCD no good at all!

Hi Marco, I'm not sure what qualifies as old and new caliper types but I may have what I'm guessing is one of the older type to spare. As fitted to my '76 350 and the 500W's I've known.
Not able to post anything till after Christmas but if you're interested let me know.
I'm in UK midlands.