STAINLESS STEEL CENTRE STAND BOLT
Posted: 19 Oct 2022 14:51
I have recently struggled to remove a rusty centre stand bolt from my 3 1/2, so wanted to get a replacement in Stainless Steel. I couldn't find any of the correct size with a 10mm fine thread. I therefore got a batch made, by a respected manufacturer, as I thought others may have the same problem.
The bolt is M10 x 140mm with a 1.25mm thread and a 17mm spanner size head. The nut has a 14mm spanner size as per original.
They fit my 350 and 500 and should never rust again! If you are interested I am selling at £20.00 for the bolt,nut,washers and P&P in the UK.
Either PM me or E Mail andy.grew@talktalk.net if you wish to order one.
Thanks
The bolt is M10 x 140mm with a 1.25mm thread and a 17mm spanner size head. The nut has a 14mm spanner size as per original.
They fit my 350 and 500 and should never rust again! If you are interested I am selling at £20.00 for the bolt,nut,washers and P&P in the UK.
Either PM me or E Mail andy.grew@talktalk.net if you wish to order one.
Thanks